Datasheet4U Logo Datasheet4U.com

LM1086 - 1.5A Low Dropout Positive Regulators

This page provides the datasheet information for the LM1086, a member of the LM1 1.5A Low Dropout Positive Regulators family.

Description

The LM1086 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 1.5A of load current.

It has the same pin-out as National Semiconductor’s industry standard LM317.

Features

  • n n n n n Available in 2.85V, 3.3V, 5V and Adjustable Versions Current Limiting and Thermal Protection Output Current 1.5A Line Regulation 0.015% (typical) Load Regulation 0.1% (typical).

📥 Download Datasheet

Datasheet preview – LM1086

📁 Similar Datasheet

  • LM1086 - 1.5-A Low Dropout Positive Regulators (Texas Instruments)
  • LM1086 - 1.5A L.D.O. VOLTAGE REGULATOR (HTC)
  • LM108 - Precision Single OPAMP (Tomson)
  • LM108 - Operational Amplifier (Linear Technology)
  • LM108-N - Operational Amplifiers (Texas Instruments)
  • LM1084 - 5-A Low Dropout Positive Regulators (Texas Instruments)
  • LM1084 - 5.0A LDO Voltage Regulator (HTC)
  • LM1085 - 3A Low Dropout Positive Voltage Regulator (CYStech Electronics)
  • LM1085 - 3A L.D.O. VOLTAGE REGULATOR (HTC)
  • LM1085 - 3-A Low Dropout Positive Regulators (Texas Instruments)
Other Datasheets by National Semiconductor
  • LM108 - Operational Amplifiers
  • LM1084 - 5A Low Dropout Positive Regulators
  • LM1085 - 3A Low Dropout Positive Regulators
  • LM108A - Operational Amplifiers
  • LM108AJAN - Operational Amplifiers
  • LM10 - Operational Amplifier/Voltage
  • LM100 - Voltage Regulator
  • LM1017 - 4-Bit Binary 7-Segment Decoder/Driver

Full PDF Text Transcription

Click to expand full text
1.5A Low Dropout Positive Regulators August 1999 LM1086 1.5A Low Dropout Positive Regulators General Description The LM1086 is a series of low dropout positive voltage regulators with a maximum dropout of 1.5V at 1.5A of load current. It has the same pin-out as National Semiconductor’s industry standard LM317. The LM1086 is available in an adjustable version, which can set the output voltage with only two external resistors. It is also available in three fixed voltages: 2.85V, 3.3V and 5.0V. The fixed versions integrate the adjust resistors. The LM1086 circuit includes a zener trimmed bandgap reference, current limiting and thermal shutdown. The LM1086 series is available in TO-220 and TO-263 packages.
Published: |