Datasheet4U Logo Datasheet4U.com

LM27222 - High-Speed 4.5A Synchronous MOSFET Driver

Description

The LM27222 is a dual N-channel MOSFET driver designed to drive MOSFETs in push-pull configurations as typically used in synchronous buck regulators.

The LM27222 takes the PWM output from a controller and provides the proper timing and drive levels to the power stage MOSFETs.

Features

  • n n n n n n n n n n n Adaptive shoot-through protection 10ns dead time 8ns propagation delay 30ns minimum on-time 0.4Ω pull-down and 0.9Ω pull-up drivers 4.5A peak driving current MOSFET tolerant design 5µA quiescent current 30V maximum input voltage in buck configuration 4V to 6.85V operating voltage SO-8 and LLP packages.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM27222 High-Speed 4.5A Synchronous MOSFET Driver Texas Instruments
LM27222 High-Speed 4.5A Synchronous MOSFET Driver Texas Instruments
LM2722 High Speed Synchronous/Asynchronous MOSFET Driver Texas Instruments
LM2720 High Frequency Multi-phase PWM Controller Texas Instruments
LM27213 Single Phase Hysteretic Buck Controller Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM2722 MOSFET Driver
LM2720 PWM Controller
LM27241 Synchronous Buck Regulator Controller
LM2724A High Speed 3A Synchronous MOSFET Driver
LM2725 High Speed Synchronous MOSFET Drivers

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com LM27222 High-Speed 4.5A Synchronous MOSFET Driver March 2006 LM27222 High-Speed 4.5A Synchronous MOSFET Driver General Description The LM27222 is a dual N-channel MOSFET driver designed to drive MOSFETs in push-pull configurations as typically used in synchronous buck regulators. The LM27222 takes the PWM output from a controller and provides the proper timing and drive levels to the power stage MOSFETs. Adaptive shoot-through protection prevents damaging and efficiency reducing shoot-through currents, thus ensuring a robust design capable of being used with nearly any MOSFET. The adaptive shoot-through protection circuitry also reduces the dead time down to as low as 10ns, ensuring the highest operating efficiency.
Published: |