Datasheet4U Logo Datasheet4U.com

LM3405 - 1A Constant Current Buck Regulator

Description

Integrated with a 1A power switch, the LM3405 is a current mode control switching buck regulator designed to provide a simple, high efficiency solution for driving LEDs.

Features

  • include user accessible enable/ dim pin for enabling and PWM dimming of LEDs, thermal shutdown, current limit and over voltage protection. Features n Thin SOT23-6 package n 4.0V to 20V input voltage range n 550kHz (LM3405Y) and 1.6MHz (LM3405X) switching frequencies n 300mΩ NMOS switch n 30nA shutdown current n Enable/DIM input for enabling and PWM dimming of LEDs n Requires only low value, ceramic capacitors n Input voltage UVLO n Internally compensated current mode control n Thermal shutdown.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM3405 1.6-MHz 1-A Constant Current Buck LED Driver Texas Instruments
LM3405A 1.6-MHz 1-A Constant Current Buck LED Driver Texas Instruments
LM340 Three Terminal Positive Voltage Regulators Motorola Inc
LM340 THREE TERMINAL POSITIVE FIXED VOLTAGE REGULATORS ON Semiconductor
LM340 1.5-A Fixed Voltage Regulators Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM340 3-Terminal Positive Regulators
LM3401 Quad Amplifiers
LM3402 0.5A Constant Current Buck Regulator
LM3402HV 0.5A Constant Current Buck Regulator
LM3403 Quad Operational Amplifiers

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com LM3405 500kHz/1.6MHz 1A Constant Current Buck Regulator for Powering LEDs ADVANCE INFORMATION October 2006 LM3405 550kHz/1.6MHz 1A Constant Current Buck Regulator for Powering LEDs General Description Integrated with a 1A power switch, the LM3405 is a current mode control switching buck regulator designed to provide a simple, high efficiency solution for driving LEDs. With a 0.2V reference voltage feedback control to minimize power dissipation, an external resistor sets the current as needed for driving various types of LEDs. Switching frequency is internally set to 550kHz (LM3405-Y) or 1.6MHz (LM3405-X), allowing small surface mount inductors and capacitors to be used.
Published: |