Datasheet4U Logo Datasheet4U.com

LM3520 - Integrated White LED Driver

Description

The LM3520 is a dual step-up DC/DC converter, designed to drive up to 5 white LEDs with a constant current and to power an organic LED display with a constant voltage.

A single external resistor is used to set the maximum LED current.

Features

  • include a low-side NFET switch that can turn off the LED string with no DC current path to ground. The LM3520 is available in a small 14-pin thermallyenchanced LLP package. Features n Integrated OLED and white-LED driver n 80% efficiency n Drives up 5 LEDs at 20mA/3.6V and 4 LEDs at 30mA/3.6V for main-display n Up to 20V @ 50mA/3.6V for sub-display n True shutdown isolation n Small External Components n 1 MHz Switching Frequency n 23V OverVoltage Protection n Wide Input Voltage Range: 2.7V to 5.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM3524D Regulating Pulse Width Modulator Texas Instruments
LM3525 Single Port USB Power Switch and Over-Current Protection Texas Instruments
LM3526 Dual Port USB Power Switch and Over-Current Protection Texas Instruments
LM3528 Multi Display LED Driver Texas Instruments
LM35 Precision Centigrade Temperature Sensor Texas Instruments

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
LM3524D Regulating Pulse Width Modulator
LM3525 Single Port USB Power Switch and Over-Current Protection
LM3526 Dual Port USB Power Switch and Over-Current Protection
LM35 Precision Centigrade Temperature Sensors
LM350 3-Amp Adjustable Regulators

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3520 Integrated White LED Driver with Organic LED Display Power Supply PRELIMINARY February 2005 LM3520 Integrated White LED Driver with Organic LED Display Power Supply General Description The LM3520 is a dual step-up DC/DC converter, designed to drive up to 5 white LEDs with a constant current and to power an organic LED display with a constant voltage. A single external resistor is used to set the maximum LED current. The LED current can be adjusted by applying a PWM signal to the EN pin. For higher efficiency the LM3520 operates with pulse frequency modulation (PFM) control scheme when the sub-display is enabled. When Main display is enabled, the device is operating in PWM mode.
Published: |