Datasheet4U Logo Datasheet4U.com

LM433 - Dual Op Amp

Description

The LM433 integrates two operational amplifiers and one 2.5V reference.

The reference is based on the LMV431 adjustable shunt regulator with the output voltage adjusted to a fixed 2.5V.

The Op Amps are similar to the LM358 with a common-mode input range that includes ground.

Features

  • Dual Op Amp Circuitry (Typical for VS = 5V) n Input offset voltage 0.6mV n Input offset current 1nA n Input bias current 3nA n Common-mode input voltage range n Power supply current 0V to VS.
  • 1V 150µA Reference Circuitry n Reference voltage 2.5V n Reference voltage deviation (.
  • 40˚C to 85˚C) 4mV n Sink Current Capability 0.2mA to 10mA Connection Diagram 8-Pin SOIC.

📥 Download Datasheet

📁 Similar Datasheet

  • LM4308 - Mobile Pixel Link Two (MPL-2) - 18-bit CPU Display Interface Master/Slave (Texas Instruments)
  • LM431 - Programmable Shunt Regulator (Fairchild Semiconductor)
  • LM431 - Adjustable precision shunt regulators (NXP)
  • LM431 - Programmable Shunt Regulator (Fairchild Semiconductor)
  • LM431 - Adjustable Precision Zener Shunt Regulator (Texas Instruments)
  • LM4312 - RGB Display Differential Interface Serializer (Texas Instruments)
  • LM431A - Programmable Shunt Regulator (Fairchild Semiconductor)
  • LM431A - Programmable Shunt Regulator (ON Semiconductor)
  • LM431A - Adjustable Precision Shunt Regulator (TAITRON)
  • LM431AC - Adjustable precision shunt regulators (NXP)
Other Datasheets by National Semiconductor
  • LM431 - Adjustable Precision Zener Shunt Regulator
  • LM4310 - RGB Display Differential Interface Deserializer
  • LM4312 - RGB Display Differential Interface Serializer
  • LM432 - Dual Op Amp with On-Chip Fixed 2.5V Reference
  • LM40 - Hardware Monitor
  • LM4040 - Precision Micropower Shunt Voltage
  • LM4041 - Precision Micropower Shunt Voltage Reference
  • LM4050 - Precision Micropower Shunt Voltage Reference

Full PDF Text Transcription

Click to expand full text
LM433 Dual Op Amp with On-Chip Fixed 2.5V Reference July 2001 LM433 Dual Op Amp with On-Chip Fixed 2.5V Reference General Description The LM433 integrates two operational amplifiers and one 2.5V reference. The reference is based on the LMV431 adjustable shunt regulator with the output voltage adjusted to a fixed 2.5V. The Op Amps are similar to the LM358 with a common-mode input range that includes ground. Integrating the reference and Op Amps creates a solution for low cost charging applications. Applications n Low cost charging circuitry n Power supplies and adapters Features Dual Op Amp Circuitry (Typical for VS = 5V) n Input offset voltage 0.
Published: |