Datasheet4U Logo Datasheet4U.com

LM48511 Datasheet Class D Audio Power Amplifier

Manufacturer: National Semiconductor (now Texas Instruments)

📥 Download Datasheet

General Description

The LM48511 integrates a boost converter with a high efficiency Class D audio power amplifier to provide 3W continuous power into an 8Ω speaker when operating from a 5V power supply.

When operating from a 3V to 4V power supply, the LM48511 can be configured to drive 1 to 2.5W into an 8Ω load with less than 1% distortion (THD+N).

The Class D amplifier

Overview

LM48511 3W, Ultra-Low EMI, Filterless, Mono, Class D Audio Power Amplifier with Spread Spectrum September 2007 LM48511 3W, Ultra-Low EMI, Filterless, Mono, Class D Audio Power Amplifier with Spread.

Key Features

  • a low noise PWM architecture that eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design. A selectable spread spectrum modulation scheme suppresses RF emissions, further reducing the need for output filters. The LM48511’s switching regulator is a current-mode boost converter operating at a fixed frequency of 1MHz. Two selectable feedback networks allow the LM48511 regulator to dynamically switch between two different output vo.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
Texas Instruments Logo LM48511 Audio Power Amplifier Texas Instruments

More Datasheets from National Semiconductor (now Texas Instruments)

Part Number Description
LM4851 Integrated Audio Amplifier
LM48510 boosted class D audio power amplifier
LM4850 Mono 1.5W / Stereo 300mW Power Amplifier
LM4852 Integrated Audio Amplifier
LM48520 Boosted Stereo Class D Audio Power Amplifier
LM4853 Mono 1.5W / Stereo 300mW Power Amplifier
LM4854 1.9W Monaural / 85mW Stereo Headphone Audio Amplifier
LM4855 Boomer AUDIO POWER AMPLIFIER
LM48555 Ceramic Speaker Driver
LM48556 Ceramic Speaker Driver