Datasheet4U Logo Datasheet4U.com

LM4950 - 7.5W Mono-BTL or 3.1W Stereo Audio Power Amplifier

Description

The LM4950 is a dual audio power amplifier primarily designed for demanding applications in flat panel monitors and TV’s.

Features

  • a low-power consumption active-low shutdown mode. Additionally, the LM4950 features an internal thermal shutdown protection mechanism along with short circuit protection. The LM4950 contains advanced pop & click circuitry that eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM4950 is a unity-gain stable and can be configured by external gain-setting resistors. Key Specifications j Quiscent Power Supply Current j POUT (SE) 16mA (typ) 3.1W (typ) 7.5W (t.

📥 Download Datasheet

Datasheet preview – LM4950

📁 Similar Datasheet

  • LM4950 - 7.5W Mono-BTL or 3.1W Stereo Audio Power Amplifier (Texas Instruments)
  • LM4951 - Wide Voltage Range 1.8 Watt Audio Amplifier (Texas Instruments)
  • LM4951A - Wide Voltage Range 1.8 Watt Audio Amplifier (Texas Instruments)
  • LM4952 - 3.1W Stereo-SE Audio Power Amplifier (Texas Instruments)
  • LM4954 - High Voltage 3 Watt Audio Power Amplifier (Texas Instruments)
  • LM4900 - Audio Power Amplifier (Texas Instruments)
  • LM4901 - 1.6 Watt Audio Power Amplifier (Texas Instruments)
  • LM4902 - 265mW at 3.3V Supply Audio Power Amplifier (Texas Instruments)
  • LM4906 - Bypass-Capacitor-less Audio Amplifier (Texas Instruments)
  • LM4910 - Output Capacitor-less Stereo 35mW Headphone Amplifier (Texas Instruments)
Other Datasheets by National Semiconductor
  • LM4951 - Wide Voltage Range 1.8 Watt Audio Amplifier
  • LM4951A - Wide Voltage Range 1.8 Watt Audio Amplifier
  • LM4952 - 3.1W Stereo-SE Audio Power Amplifier
  • LM4953 - Ground-Referenced Ultra Low Noise / Ceramic Speaker Driver
  • LM4954 - HIgh Voltage 3 Watt Audio Power Amplifier
  • LM4900 - 265mW at 3.3V Supply Audio Power Amplifier
  • LM4901 - 1.6 Watt Audio Power Amplifier
  • LM4902 - 265mW at 3.3V Supply Audio Power Amplifier

Full PDF Text Transcription

Click to expand full text
LM4950 7.5W Mono-BTL or 3.1W Stereo Audio Power Amplifier August 2004 LM4950 7.5W Mono-BTL or 3.1W Stereo Audio Power Amplifier General Description The LM4950 is a dual audio power amplifier primarily designed for demanding applications in flat panel monitors and TV’s. It is capable of delivering 3.1 watts per channel to a 4Ω single-ended load with less than 1% THD+N or 7.5 watts mono BTL to an 8Ω load, with less than 10% THD+N from a 12VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4950 does not require bootstrap capacitors or snubber circuits. Therefore, it is ideally suited for display applications requiring high power and minimal size.
Published: |