Datasheet4U Logo Datasheet4U.com

LM5000EP - Regulator

Description

The LM5000EP is a monolithic integrated circuit specifically designed and optimized for flyback, boost or forward power converter applications.

The internal power switch is rated for a maximum of 80V, with a current limit set to 2A.

Features

  • include softstart to reduce stresses during start-up and an external shutdown pin for remote ON/OFF control. There are two operating frequency ranges available. The LM5000-3EP is pin selectable for either 300kHz (FS Grounded) or 700kHz (FS Open). The LM5000-6EP is pin selectable for either 600kHz (FS Grounded) or 1.3MHz (FS Open). The device is available in a low profile 16-lead TSSOP package or a thermally enhanced 16-lead LLP package.

📥 Download Datasheet

Datasheet preview – LM5000EP

📁 Similar Datasheet

  • LM5000 - Regulator (Texas Instruments)
  • LM5001 - Regulator (Texas Instruments)
  • LM5001-Q1 - Regulator (Texas Instruments)
  • LM5002 - Regulator (Texas Instruments)
  • LM5005 - Step-Down Switching Regulator (Texas Instruments)
  • LM5006 - On-Time Buck Switching Regulator (Texas Instruments)
  • LM5007 - DC/DC Buck Converter (Texas Instruments)
  • LM5008 - DC/DC Buck Switching Regulator (Texas Instruments)
  • LM5008A - DC/DC Buck Switching Regulator (Texas Instruments)
  • LM5009 - Step-Down Switching Regulator (Texas Instruments)
Other Datasheets by National Semiconductor
  • LM5000 - Regulator
  • LM5001 - Regulator
  • LM5002 - Regulator
  • LM5005 - High Voltage 2.5 Amp Buck Regulator
  • LM5007 - High Voltage (80V) Step Down Switching Regulator
  • LM5007EP - Enhanced Plastic High Voltage (80V) Step Down Switching Regulator
  • LM5008 - High Voltage (100V) Step Down Switching Regulator
  • LM5008A - 350 mA Constant On-Time Buck Switching Regulator

Full PDF Text Transcription

Click to expand full text
LM5000EP Enhanced Plastic High Voltage Switch Mode Regulator May 2004 LM5000EP Enhanced Plastic High Voltage Switch Mode Regulator General Description The LM5000EP is a monolithic integrated circuit specifically designed and optimized for flyback, boost or forward power converter applications. The internal power switch is rated for a maximum of 80V, with a current limit set to 2A. Protecting the power switch are current limit and thermal shutdown circuits. The current mode control scheme provides excellent rejection of line transients and cycle-by-cycle current limiting. An external compensation pin and the built-in slope compensation allow the user to optimize the frequency compensation.
Published: |