LMC6572 Dual/LMC6574 Quad
Low Voltage (2.7V and 3V) Operational Amplifier
Low voltage operation and low power dissipation make the
LMC6574/2 ideal for battery-powered systems.
3V amplifier performance is backed by 2.7V guarantees to
ensure operation throughout battery lifetime. These guaran-
tees also enable analog circuits to operate from the same
3.3V supply used for digital logic.
Battery life is maximized because each amplifier dissipates
only micro-watts of power.
The LMC6574/2 does not sacrifice functionality for low volt-
age operation. The LMC6574/2 generates 120 dB of
open-loop gain just like a conventional amplifier, but the
LMC6574/2 can do this from a 2.7V supply.
These amplifiers are designed with features that optimize
low voltage operation. The output voltage swings rail-to-rail
to maximize signal-to-noise ratio and dynamic signal range.
The common-mode input voltage range extends from
800 mV below the positive supply to 100 mV below ground.
This device is built with National’s advanced Double-Poly
Silicon-Gate CMOS process.
LMC6572 is also available in MSOP package which is al-
most half the size of a SO-8 device.
(Typical unless otherwise noted)
n Guaranteed 2.7V and 3V Performance
n Rail-to-Rail Output Swing (within 5 mV of supply rail,
100 kΩ load)
n Ultra-Low Supply Current: 40 µA/Amplifier
n Low Cost
n Ultra-Low Input Current: 20 fA
n High Voltage Gain @ VS=2.7V, RL=100 kΩ: 120 dB
n Specified for 100 kΩ and 5 kΩ loads
n Available in MSOP Package
n Transducer Amplifier
n Portable or Remote Equipment
n Battery-Operated Instruments
n Data Acquisition Systems
n Medical Instrumentation
n Improved Replacement for TLV2322 and TLV2324
Order Number LMC6572AIN, LMC6572BIN,
LMC6572AIM, LMC6572BIM or LMC6572BIMM
See NS Package Number N08E, M08A or MUA08A
Order Number LMC6574AIN, LMC6574BIN,
LMC6574AIM or LMC6574BIM
See NS Package Number N14A or M14A
© 1999 National Semiconductor Corporation DS011934