Datasheet4U Logo Datasheet4U.com

LMH6505 - Variable Gain Amplifier

Description

The LMH6505 is a wideband DC coupled voltage controlled gain stage followed by a high-speed current feedback op amp which can directly drive a low impedance load.

The gain adjustment range is 80 dB for up to 10 MHz which is accomplished by varying the gain control input voltage, VG.

Features

  • VS = ± 5V, TA = 25˚C, RF = 1 kΩ, RG = 100Ω, RL = 100Ω, AV = AVMAX = 9.4 V/V, Typical values unless specified. n.
  • 3 dB BW 150 MHz n Gain control BW 100 MHz n Adjustment range ( < 10 MHz) 80 dB ± 0.50 dB n Gain matching (limit) n Supply voltage range 7V to 12V n Slew rate (inverting) 1500 V/µs n Supply current (no load) 11 mA ± 60 mA n Linear output current ± 2.4V n Output voltage swing n Input noise voltage 4.4 nV/ n Input noise current 2.6 pA/ n THD (20 MHz, RL = 100Ω, VO = 2 VPP).

📥 Download Datasheet

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com LMH6505 Wideband, Low Power, Linear-in-dB, Variable Gain Amplifier January 2006 LMH6505 Wideband, Low Power, Linear-in-dB, Variable Gain Amplifier General Description The LMH6505 is a wideband DC coupled voltage controlled gain stage followed by a high-speed current feedback op amp which can directly drive a low impedance load. The gain adjustment range is 80 dB for up to 10 MHz which is accomplished by varying the gain control input voltage, VG. Maximum gain is set by external components, and the gain can be reduced all the way to cut-off. Power consumption is 110 mW with a speed of 150 MHz and a gain control bandwidth (BW) of 100 MHz. Output referred DC offset voltage is less than 55 mV over the entire gain control voltage range.
Published: |