Datasheet4U Logo Datasheet4U.com

LMV1032-15 - Amplifiers

Download the LMV1032-15 datasheet PDF (LMV1032-06 included). The manufacturer datasheet provides complete specifications, pinout details, electrical characteristics, and typical applications for amplifiers.

Description

The LMV1032 is an audio amplifier series for small form factor electret microphones.

It is designed to replace the JFET preamp currently being used.

The LMV1032 series is ideal for extended battery life applications, such as a bluetooth communication link.

Features

  • (Typical LMV1032-06, 1.7V Supply; Unless Otherwise Noted) n Output voltage noise (A-weighted).
  • 97 dBV n Low supply current 60 µA n Supply voltage 1.7V to 5V n PSRR 84 dB n Signal to noise ratio 58 dB n Input capacitance 2 pF > 100 MΩ n Input impedance < 200Ω n Output impedance n Max input signal 300 mVPP n Temperature range.
  • 40˚C to 85˚C n Offered in 1.13 x 1.13 x 0.4mm Ultra Thin micro SMD lead free (NOPB) package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LMV1032-06_NationalSemiconductor.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

  • LMV1032 - LMV1032-06/LMV1032-15/LMV1032-25 Amps for 3-Wire Analog Electret Microphones (Rev. G) (ETCTI)
  • LMV1031 - LMV1031-20 Amp for Internal 3-Wire Analog Microphones External Preamp (Rev. B) (ETCTI)
  • LMV1012 - LMV1012 Analog Series: Pre-Amplified IC for High Gain 2-Wire Microphones (Rev. H) (ETCTI)
  • LMV1015 - LMV1015 Analog Series: Built-in Gain IC for High Sensitivity 2-Wire Microphone (Rev. B) (ETCTI)
  • LMV1024 - PDM Output with Pre-Amplifier (Texas Instruments)
  • LMV1026 - PDM Output with Pre-Amplifier (Texas Instruments)
  • LMV1088 - Dual Input Far Field Noise Suppression Microphone Amp w/Auto Cal (Rev. J) (ETCTI)
  • LMV1089 - Dual Input Far Field Noise Suppression Microphone Amp w/ Auto Calibration (Rev. H) (ETCTI)
  • LMV1090 - LMV1090 Dual Input Far Field Noise Suppression Microphone Amplifier (Rev. I) (ETCTI)
  • LMV1090 - Far Field Noise Suppression Microphone Amplifier (National Semiconductor Corporation)
Other Datasheets by National Semiconductor

Full PDF Text Transcription

Click to expand full text
LMV1032-06/LMV1032-15/LMV1032-25 Amplifiers for 3 Wire Analog Electret Microphones February 2004 LMV1032-06/LMV1032-15/LMV1032-25 Amplifiers for 3 Wire Analog Electret Microphones General Description The LMV1032 is an audio amplifier series for small form factor electret microphones. It is designed to replace the JFET preamp currently being used. The LMV1032 series is ideal for extended battery life applications, such as a bluetooth communication link. The addition of a third pin in electret microphones that incorporate the LMV1032 allows for a dramatic reduction in supply current as compared to the JFET equipped electret microphone. Microphone supply current is thus reduced to 60 µA, assuring longer battery life. The LMV1032 series is guaranteed for supply voltages from 1.
Published: |