LMZ10503 Description
A low ESR input capacitance should be located as close as possible to the VIN pin and exposed pad (EP). Active high enable input for the device. An internal 2 µA current source charges an external capacitor connected between SS and GND pins to set the output voltage ramp rate during startup.
LMZ10503 Key Features
- Integrated shielded inductor
- Flexible startup sequencing using external soft-start
- Protection against in-rush currents and faults such as input
- 40°C to +125°C junction temperature operating range
- Single exposed pad and standard pinout for easy
- Fully enabled for WEBENCH® and Power Designer