Datasheet4U Logo Datasheet4U.com

MN54AC258-X - Quad 2 Input Multiplexer

Description

The AC258 is a quad 2-input multiplexer with 3-state outputs.

Four bits of data from two sources can be selected using a Common Data Select Input.

The four outputs present the selected data in the complement (inverted) form.

Features

  • Icc and Ioz reduced by 50% Multiplexer expansion by tying outputs together Inverting TRI-STATE outputs Outputs source/sink 24 mA Standard Military Drawing (SMD) - AC258: 5962-91604 2 MN54AC258-X REV 1B0.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MN50000 CMOS Gate Arrays Panasonic
MN50003 CMOS Gate Arrays Panasonic
MN50005 CMOS Gate Arrays Panasonic
MN50007 CMOS Gate Arrays Panasonic
MN50010 CMOS Gate Arrays Panasonic

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
MN54AC251-X 8-Input Multiplexer
MN54AC2525-X REV 1B0
MN54AC257-X Quad 2 Input Multiplexer
MN54AC244-X Octal Buffers/Line Drivers
MN54AC14-X Hex Inverter Schmidt Trigger

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MICROCIRCUIT DATA SHEET MN54AC258-X REV 1B0 Original Creation Date: 07/01/96 Last Update Date: 03/31/97 Last Major Revision Date: 07/01/96 Quad 2 Input Multiplexer With TRI - STATE Outputs General Description The AC258 is a quad 2-input multiplexer with 3-state outputs. Four bits of data from two sources can be selected using a Common Data Select Input. The four outputs present the selected data in the complement (inverted) form. The outputs may be switched to a high impedance state with a logic HIGH on the common Output Enable (OE) input, allowing the outputs to interface directly with bus-oriented systems.
Published: |