Datasheet4U Logo Datasheet4U.com

SM72480 - LLP-6 Factory Preset Temperature Switch and Temperature Sensor

Description

The SM72480 is a low-voltage, precision, dual-output, lowpower temperature switch and temperature sensor.

The temperature trip point (TTRIP) is set at the factory to be 120°C.

Built-in temperature hysteresis (THYST) keeps the output stable in an environment of temperature instability.

Features

  • Renewable Energy Grade.
  • Low 1.6V operation.
  • Latching function: device can latch the Over Temperature.
  • condition Push-pull and open-drain temperature switch outputs Very linear analog VTEMP temperature sensor output VTEMP output short-circuit protected 2.2 mm by 2.5 mm (typ) LLP-6 package Excellent power supply noise rejection Key Specifications.
  • Supply Voltage.
  • Supply Current.
  • Accuracy, Trip Point Temperature 1.6V to 5.5V 8 μA (typ) 0°.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SM72480 WSON-6 Factory Preset Temperature Switch and Temperature Sensor Texas Instruments
SM72482 Dual 5A Compound Gate Driver Texas Instruments
SM72485 Constant On-Time Buck Switching Regulator Texas Instruments
SM724 SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR Polyfet RF Devices
SM724 SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR Polyfet RF Devices

Other Datasheets by National Semiconductor (Texas Instruments)

Part Number Description
SM72482 SolarMagic Dual 5A Compound Gate Driver
SM72485 150 mA Constant On-Time Buck Switching Regulator
SM72442 Programmable Maximum Power Point Tracking Controller
SM72238 SolarMagic Micropower Voltage Regulator
SM72295 Photovoltaic Full Bridge Driver

Full PDF Text Transcription

Click to expand full text
SM72480 SolarMagic 1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor May 11, 2011 SM72480 SolarMagic 1.6V, LLP-6 Factory Preset Temperature Switch and Temperature Sensor General Description The SM72480 is a low-voltage, precision, dual-output, lowpower temperature switch and temperature sensor. The temperature trip point (TTRIP) is set at the factory to be 120°C. Built-in temperature hysteresis (THYST) keeps the output stable in an environment of temperature instability. In normal operation the SM72480 temperature switch outputs assert when the die temperature exceeds TTRIP. The temperature switch outputs will reset when the temperature falls below a temperature equal to (TTRIP − THYST).
Published: |