900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




National Semiconductor Electronic Components Datasheet

USBN9603 Datasheet

USBN9603 Universal Serial Bus Full Speed Function Controller with Enhanced DMA Support

No Preview Available !

- May 1998
PRELIMINARY
March 2000
USBN9603 Universal Serial Bus
Full Speed Function Controller with Enhanced DMA Support
General Description
The USBN9603 is an integrated, USB Node controller that
features enhanced DMA support with many automatic data
handling features. It is compatible with USB specification ver-
sions 1.0 and 1.1, and is an advanced version of the currently
available USBN9602.
A single IC integrates the required USB transceiver with a
3.3V regulator, a Serial Interface Engine (SIE), USB end-
point (EP) FIFOs, a versatile 8-bit parallel interface, a clock
generator and a MICROWIRE/PLUS™ interface. Seven
endpoint pipes are supported: one for the mandatory con-
trol endpoint and six to support interrupt, bulk and isochro-
nous endpoints. Each endpoint pipe has a dedicated FIFO,
8 bytes for the control endpoint and 64 bytes for the other
endpoints. The 8-bit parallel interface supports multiplexed
and non-multiplexed style CPU address/data buses. A pro-
grammable interrupt output scheme allows device configu-
ration for different interrupt signaling requirements.
Outstanding Features
q Low EMI, low standby current, 24 MHz oscillator
q Advanced DMA mechanism
q Fully static HALT mode with asynchronous wake-up
for bus powered operation
q 5V or 3.3V operation
q Improved input range 3.3V signal voltage regulator
q All unidirectional FIFOs are 64 bytes
q Power-up reset and startup delay counter simplify sys-
tem design
q Simple programming model controlled by external controller
q Available in two packages
USBN9603SLB: small footprint for new designs and
portable applications
USBN9603-28M: standard package, pin-to-pin com-
patible with USBN9602-28M
Block Diagram
CS RD WR A0/ALE D7-0/AD7-0 INTR MODE1-0
Microcontroller Interface
RESET
VCC
GND
Endpoint/Control FIFOs
Serial Interface Engine (SIE)
Media Access Controller (MAC)
Physical Layer Interface (PHY)
24 MHz
Oscillator
Clock
Generator
Clock
Recovery
USB Event
Detect
Transceiver
VReg
D+ D- Upstream Port
XIN
XOUT
CLKOUT
V3.3
AGND
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
MICROWIRE/PLUSand MICROWIREare trademarks of National Semiconductor Corporation.
© 2000 National Semiconductor Corporation
www.national.com


National Semiconductor Electronic Components Datasheet

USBN9603 Datasheet

USBN9603 Universal Serial Bus Full Speed Function Controller with Enhanced DMA Support

No Preview Available !

Features
q Full-speed USB node device
q USB transceiver
q 24 MHz oscillator circuit
q Programmable clock generator
q Serial Interface Engine (SIE) consisting of Physical
Layer Interface (PHY) and Media Access Controller
(MAC), USB Specification 1.0 and 1.1 compliant
q Control/Status register file
q USB Function Controller with seven FIFO-based End-
points:
One bidirectional Control Endpoint 0 (8 bytes)
Three Transmit Endpoints (64 bytes each)
Three Receive Endpoints (64 bytes each)
q 8-bit parallel interface with two selectable modes:
Non-multiplexed
Multiplexed (Intel compatible)
q Enhanced DMA support
Automatic DMA (ADMA) mode for fully CPU-inde-
pendent transfer of large bulk or ISO packets
DMA controller, together with the USBN9603 ADMA
logic, can transfer a large block of data in 64-byte
packets via the USB
Automatic Data PID toggling/checking and NAK
packet recovery (maximum 256x64 bytes of data =
16K bytes)
q MICROWIRE/PLUSinterface
www.national.com
2


Part Number USBN9603
Description USBN9603 Universal Serial Bus Full Speed Function Controller with Enhanced DMA Support
Maker National Semiconductor
PDF Download

USBN9603 Datasheet PDF






Similar Datasheet

1 USBN9602 USBN9602 (Universal Serial Bus) Full Speed Function Controller With DMA Support
National Semiconductor
2 USBN9602 USBN9602 (Universal Serial Bus) Full Speed Function Controller with DMA Support (Rev. A)
ETCTI
3 USBN9603 USBN9603 Universal Serial Bus Full Speed Function Controller with Enhanced DMA Support
National Semiconductor
4 USBN9603 USBN9603 USBN9604 USB Full Speed Node Controller w/Enhanced DMA Support (Rev. L)
ETCTI
5 USBN9604 USBN9603/USBN9604 Universal Serial Bus Full Speed Node Controller with Enhanced DMA Support
National Semiconductor
6 USBN9604 USBN9603 USBN9604 USB Full Speed Node Controller w/Enhanced DMA Support (Rev. L)
ETCTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy