Datasheet4U Logo Datasheet4U.com

NJU3102 - 4-BIT SINGLE CHIP TINY CONTROLLER

Description

No.

SYMBOL 4 PA0 5 PA1 6 PA2 7 PA3 FUNCTION 4-bit Input / Output PORTA.

Selects a terminal circuit for PORT grouped with 4 lines from follows by the mask option.

C-MOS Input Terminal with Pull-up Resistance(IA) C-MOS Input Terminal(IC) C-MOS Output Terminal(OB) Maker Testing Termin

📥 Download Datasheet

Datasheet preview – NJU3102

Datasheet Details

Part number NJU3102
Manufacturer New Japan Radio
File Size 769.34 KB
Description 4-BIT SINGLE CHIP TINY CONTROLLER
Datasheet download datasheet NJU3102 Datasheet
Additional preview pages of the NJU3102 datasheet.

📁 Similar Datasheet

  • NJU3426 - VFD CONTROLLER / DRIVER (JRC)
  • NJU3427 - 36 Outputs VFD Controller/Driver (JRC)
  • NJU3430 - 16-CHARACTER 1-LINE DOT MATRIX VFD CONTROLLER DRIVER (JRC)
  • NJU3610 - 1bit Delta-Sigma Stereo ADC (NJR)
  • NJU3711A - 8-BIT SERIAL TO PARALLEL CONVERTER (JRC)
  • NJU3712A - 8-BIT SERIAL TO PARALLEL CONVERTER (JRC)
  • NJU3713A - 12-BIT SERIAL TO PARALLEL CONVERTER (JRC)
  • NJU3714A - 12-BIT SERIAL TO PARALLEL CONVERTER (JRC)
  • NJU3715A - 16-BIT SERIAL TO PARALLEL CONVERTER (JRC)
  • NJU3716A - 16-BIT SERIAL TO PARALLEL CONVERTER (JRC)
Other Datasheets by New Japan Radio
  • NJU3101 - 4-BIT SINGLE CHIP TINY CONTROLLER
  • NJU3151 - 4-BIT SINGLE CHIP OTP TINY CONTROLLER
  • NJU3152 - 4-BIT SINGLE CHIP OTP TINY CONTROLLER
  • NJU3421A - VFD CONTROLLER DRIVER
  • NJU3501 - 4-BIT SINGLE CHIP MICRO CONTROLLER
  • NJU3502 - 4-BIT SINGLE CHIP MICRO CONTROLLER
  • NJU3503 - 4-BIT SINGLE CHIP MICRO CONTROLLER
  • NJU3504 - 4-BIT SINGLE CHIP MICRO CONTROLLER

Full PDF Text Transcription

Click to expand full text
NJU3102 n TERMINAL DESCRIPTION No. SYMBOL 4 PA0 5 PA1 6 PA2 7 PA3 FUNCTION 4-bit Input / Output PORTA. Selects a terminal circuit for PORT grouped with 4 lines from follows by the mask option. · C-MOS Input Terminal with Pull-up Resistance(IA) · C-MOS Input Terminal(IC) · C-MOS Output Terminal(OB) Maker Testing Terminal with Pull-down Resistance 8 TEST INPUT The terminal is recommended to connect to GND. Internal Oscillator Terminals. 9 OSC1 INPUT Connects a device selected from the ceramic or the crystal 10 OSC2 (OUTPUT) resonator, or the resistor, to these terminals for the internal oscillator. In the external clock operation, OSC1 is the external clock input terminal and OSC2 is normally open terminal. VSS – Power Source (0V) 11 12 RESET INPUT RESET Terminal.
Published: |