LAQ2D152MEL Datasheet | Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS AQ Snap-in Terminal Type, Permissible Abnormal Voltage, Smaller-sized, Wide Temperature Range (692 type) series Withstanding 2000 hours application of rated ripple current of 105°C. Extended voltage range at 200V, 220V and 400V. Smaller case sizes and higher ripple current than AK series. Improved safety Features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the Ro HS directive (2002/95/EC). Smaller Specifications Item Performance Characteristics Category Temperature Range - 25 ~ +105°C Rated Voltage Range - 220 - 400V Rated Capacitance Range 33 ~ 1500µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current tan δ Stability at Low Temperature I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 0.20MAX. 120Hz, 20°C Rated voltage(V) Impedance ratio (MAX) Z - 25°C/Z+20°C - 220 8 400 8 Measurement frequency : 120Hz Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Shelf Life Safety Performance Marking After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change tan δ Leakage current Within ±15% of initial value 150% or less of initial specified value Initial specified value or...