LGG2Z222MELB50 Datasheet | Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS GG Snap-in Terminal Type, 105°C Ultra-Smaller-Sized series One rank smaller case sized than GN series. Suited for equipment down sizing. pliant to the Ro HS directive (2002/95/EC). Smaller Smaller Specifications Item Performance Characteristics Category Temperature Range - 40 to +105°C (160 to 250V) , - 25 to +105°C (400 to 450V) Rated Voltage Range 160 to 450V Rated Capacitance Range 100 to 3300µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current I 3 CV(µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 160 to 420 0.15 450 0.20 Measurement frequency : 120Hz, Temperature : 20°C Stability at Low Temperature Rated voltage (V) Impedance ratio ZT/Z20 (MAX.) - 25°C/ Z+20°C 160 to 250 4 400 to 450 8 Measurement frequency : 120Hz Temperature : 20°C Endurance Shelf Life Marking The specifications listed at right shall be met when the capacitors are restored to 20°C after D.C. bias plus rated ripple current is applied for 2000 hours at 105°C, the peak voltage shall not exceed the rated voltage. After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the characteristic requirements listed at right. Printed with white color letter on black sleeve. Capacitance change tan δ Leakage...