datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Nichicon
Nichicon

PCV1V151MCL1GS Datasheet Preview

PCV1V151MCL1GS Datasheet

ALUMINUM ELECTROLYTIC CAPACITORS

No Preview Available !

PCV1V151MCL1GS pdf
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
CV Chip Type, High Voltage / Long Life
series
High voltage (to 63V), Low ESR, High ripple current.
Load life of 3000 hours at 105°C.
SMD type : Lead free reflow soldering condition at
260°C peak correspondence.
Compliant to the RoHS directive (2002/95/EC).
CV
CFHigh Voltage Long Life
Specifications
Item
Performance Characteristics
Category Temperature Range 55 to +105°C
Rated Voltage Range
16 to 63V
Rated Capacitance Range 5.6 to 470µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Tangent of loss angle (tan δ) Less than or equal to the specified value at 120Hz, 20°C
ESR ( 1)
Less than or equal to the specified value at 100kHz, 20°C
Leakage Current ( 2) Less than or equal to the specified value . After 2 minutes' application of rated voltage at 20°C
Temperature Characteristics
(Max.Impedance Ratio)
Z+105°C / Z+20°C 1.25
Z55°C / Z+20°C 1.25
(100kHz)
Endurance
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 3000 hours at 105°C.
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Damp Heat
(Steady State)
The specifications listed at right shall be met when the
capacitors are restored to 20°C after the rated voltage is
applied for 1000 hours at 60°C, 90% RH.
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 20% of the initial capacitance value ( 3)
150% or less than the initial specified value
150% or less than the initial specified value
Less than or equal to the initial specified value
Resistance to
Soldering Heat
Marking
After soldering the capacitor under the soldering conditions
prescribed here, the capacitor shall meet the specifications listed at
right, provided that it's temperature profile is measured at the
capacitor top and the terminal.
Pre-heating shall be done at 150 to 200°C and for 60 to 180 sec.
The duration for over +230°C temperature at capacitor surface shall
not exceed 60 seconds.
In the case of peak temp, less than 250°C, reflow soldering shall be
two times maximum.
In the case of peak temp, less than 260°C, reflow soldering shall be
once.
Measurement for solder temperature profile shall be made at the
capacitor top and the terminal.
Navy blue print on the case top
Capacitance change
tan δ
ESR ( 1)
Leakage current ( 2)
Within ± 10% of the initial capacitance value ( 3)
130% or less than the initial specified value
130% or less than the initial specified value
Less than or equal to the initial specified value
1 ESR should be measured at both of the terminal ends closest where the terminals protrude through the plastic platform.
2 Conditioning : If any doubt arises, measure the leakage current after the voltage treatment of applying DC rated voltage continuously to the capacitor for 120
minutes at 105°C.
3 Initial value : The value before test of examination of resistance to soldering.
Dimensions
Capacitance
Lot No.
Plastic platform
0.3 MAX.
C±0.2
Positive
Series
Voltage (V:35V)
L
+0.1
- 0.4
Negative
H
Type numbering system (Example : 35V 82µF)
1 2 3 4 5 6 7 8 9 10 11 12 13 14
PCV 1 V 8 2 0 MC L 1 GS
Taping code
Size code
Configuration
Capacitance toleranc (±20%)
Rated capacitance (82µF)
Rated voltage (35V)
Series name
Type
(mm)
Size φ6.3 × 6L φ8 × 7L φ8 × 10L φ8 × 12L φ10 × 8L φ10 × 10L φ10×12.7L
φD 6.3 8.0 8.0 8.0 10.0 10.0 10.0
L 5.9 6.9 9.9 11.9 7.9 9.9 12.6
A 7.3 9.0 9.0 9.0 11.0 11.0 11.0
B 6.6 8.3 8.3 8.3 10.3 10.3 10.3 Voltage
C 6.6 8.3 8.3 8.3 10.3 10.3 10.3
E 2.1 3.2 3.2 3.2 4.6 4.6 4.6
V 16 20 25 35 50 63
H 0.5 to 0.8 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 0.8 to 1.1 Code C D E V H J
Dimension table in next page.
CAT.8100Z



Nichicon
Nichicon

PCV1V151MCL1GS Datasheet Preview

PCV1V151MCL1GS Datasheet

ALUMINUM ELECTROLYTIC CAPACITORS

No Preview Available !

PCV1V151MCL1GS pdf
CONDUCTIVE POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
CVseries
Standard Ratings
Rated Voltage Surge Voltage Rated Capacitance
(V)(code)
(V)
(µF)
56
100
16
(1C)
18.4
220
220
270
330
470
47
68
20
(1D)
23.0
150
150
220
270
330
33
56
25
(1E)
28.7
120
120
150
180
270
18
27
35
(1V)
40.2
56
68
82
100
150
8.2
15
50
(1H)
57.5
33
33
39
47
68
5.6
10
63
(1J)
72.4
22
22
27
33
47
Case Size
φD × L (mm)
6.3 × 6
8×7
8 × 10
10 × 8
8 × 12
10 × 10
10 × 12.7
6.3 × 6
8×7
8 × 10
10 × 8
8 × 12
10 × 10
10 × 12.7
6.3 × 6
8 ×7
8 × 10
10 × 8
8 × 12
10 × 10
10 × 12.7
6.3 × 6
8 ×7
8 × 10
10 × 8
8 × 12
10 × 10
10 × 12.7
6.3 × 6
8 ×7
8 × 10
10 × 8
8 × 12
10 × 10
10 × 12.7
6.3 × 6
8 ×7
8 × 10
10 × 8
8 × 12
10 × 10
10 × 12.7
tan δ
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
0.12
Leakage Current
ESR (m)
(µA) (at 100kHz 20 C)
179 50
320 36
704 27
704 31
864 26
1056
26
1504
25
188 55
272 45
600 28
600 33
880 27
1080
27
1320
26
165 60
280 50
600 29
600 35
750 28
900 28
1350
27
126 64
189 55
392 31
476 37
574 29
700 29
1050
28
82 81
150 63
330 36
330 49
390 34
470 30
680 29
71 105
126 75
277 37
277 56
340 35
416 31
592 30
Rated Ripple
(mArms)
1000
1500
2000
2000
2300
2400
2800
1000
1300
2000
1900
2300
2300
2700
900
1300
1900
1800
2200
2300
2700
900
1200
1900
1800
2200
2200
2600
800
1100
1700
1500
2000
2200
2600
700
1000
1700
1400
2000
2200
2500
Part Number
PCV1C560MCL1GS
PCV1C101MCL1GS
PCV1C221MCL6GS
PCV1C221MCL1GS
PCV1C271MCL1GS
PCV1C331MCL1GS
PCV1C471MCL1GS
PCV1D470MCL1GS
PCV1D680MCL1GS
PCV1D151MCL6GS
PCV1D151MCL1GS
PCV1D221MCL1GS
PCV1D271MCL1GS
PCV1D331MCL1GS
PCV1E330MCL1GS
PCV1E560MCL1GS
PCV1E121MCL6GS
PCV1E121MCL1GS
PCV1E151MCL1GS
PCV1E181MCL1GS
PCV1E271MCL1GS
PCV1V180MCL1GS
PCV1V270MCL1GS
PCV1V560MCL1GS
PCV1V680MCL1GS
PCV1V820MCL1GS
PCV1V101MCL1GS
PCV1V151MCL1GS
PCV1H8R2MCL1GS
PCV1H150MCL1GS
PCV1H330MCL6GS
PCV1H330MCL1GS
PCV1H390MCL1GS
PCV1H470MCL1GS
PCV1H680MCL1GS
PCV1J5R6MCL1GS
PCV1J100MCL1GS
PCV1J220MCL6GS
PCV1J220MCL1GS
PCV1J270MCL1GS
PCV1J330MCL1GS
PCV1J470MCL1GS
Rated ripple current (mArms) at 105°C 100kHz
No marked, 1 will be put at 12th digit of type numbering system.
: In this case, 6 will be put at 12th digit of type numbering system.
Taping specifications are given in page 23.
Recommended land size, soldering by reflow are given in page 18, 19.
Please refer to page 3 for the minimum order quantity.
CAT.8100Z


Part Number PCV1V151MCL1GS
Description ALUMINUM ELECTROLYTIC CAPACITORS
Maker Nichicon
Total Page 2 Pages
PDF Download
PCV1V151MCL1GS pdf
PCV1V151MCL1GS Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 PCV1V151MCL1GS ALUMINUM ELECTROLYTIC CAPACITORS Nichicon
Nichicon
PCV1V151MCL1GS pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy