UAQ2D680MHD Datasheet | Nichicon

ALUMINUM ELECTROLYTIC CAPACITORS AQ Wide Temperature Range, Permissible Abnormal Voltage (Radial Lead Type) series Improved safety feature for abnormally excessive voltage. High ripple current product. Adapted to the Ro HS directive (2002/95/EC). Smaller Specifications Item Category Temperature Range Rated Voltage Range Rated Capacitance Range Capacitance Tolerance Leakage Current tan δ Performance Characteristics - 40 ~ +105°C 200 - 400V 10 ~ 220µF ± 20% at 120Hz, 20°C After 1 minute's application of rated voltage, leakage current is 0.04CV+100 (µA) or less. Rated voltage (V) tan δ (MAX.) 200 0.15 400 0.15 Measurement frequency:120Hz, Temperature:20°C Stability at Low Temperature Rated voltage (V) Impedance ratio ZT / Z20 (MAX.) Z- 25°C / Z+20°C Z- 40°C / Z+20°C 200 3 6 400 Measurement frequency : 120Hz 8 10 Endurance Shelf Life Safety Performance Marking After an application of D.C. bias voltage plus the rated ripple current for 2000 hours at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The pressure relief vent will operate in normal conditions, with no dangerous conditons such as flames, ignitions or dispersion of pieces of the capacitor and / or case. voltage (V) Limited DC current Test conditions Test Voltage 200 4A 300VDC and...