L1085DG Datasheet | Niko-Sem

NIKO-SEM 3A Adjustable Low Dropout Linear Regulator (LDO) L1085XG TO-252,263,220 Lead-Free GENERAL DESCRIPTION The L1085G is a positive and low dropout three-terminal voltage regulator with 3A output current capability. This device is designed for use in low voltage applications that offers lower dropout voltage and faster transient response. This device is fully protected against over current faults, over temperature operation, reversed input polarity, reversed lead insertion, transient voltage spike …etc. On-Chips trimming the reference voltage to 1% and Features the low dropout of maximum 1.45 volts. The L1085G Series regulators are available in the popular industry standard TO-220 TO-263 and TO-252 packages. Features z Very easy to use, it requires only two external resistors to set the output voltage z Low dropout voltage: 1.3V typical at up to 3A z Low ground current z Fast transient response z Current & thermal limiting z Line regulation: 0.5% typical z Load regulation: 0.5% typical z TO-220, TO-263 and TO-252 packages APPLICATIONS z High current microprocessor supplies z Low voltage logic supply z Powering VGA & sound card z Portable instrumentation z Constant current regulator z Post regulator for switching power supply TYPICAL APPLICATION Vin Cin + 10u F L1085 ADJ Vref Iadj Vout R1 Cout + 10u F R2 Vo = Vref (1+R2/R1) + Iadj x R2 1. Cin needed if device is far from from filter capacitors. 2. Cout required for stability. - Basic Adjustable Regulator Circuit - 1 JUL-15-2004 Free Datasheet http://.. NIKO-SEM 3A Adjustable Low Dropout Linear Regulator...