1N5348B Datasheet | onsemi

Features - Zener Voltage Range - 3.3 V to 200 V - ESD Rating of Class 3 (>16 k V) per Human Body Model - Surge Rating of up to 180 W @ 8.3 ms - Maximum Limits Guaranteed on up to Six Electrical Parameters - Pb- Free Packages are Available- Mechanical Characteristics CASE: Void free, transfer- molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES: 260°C, 1/16 in. from the case for 10 seconds POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any MAXIMUM RATINGS Rating Symbol Value Unit Max. Steady State Power Dissipation @ TL = 25°C, Lead Length = 3/8 in Derate above 25°C Junction- to- Lead Thermal Resistance Operating and Storage Temperature Range W q JL TJ, Tstg 40 m W/°C °C/W - 65 to +200 °C (Note 1) Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Max operating temperature for DC conditions is 150°C, but not to exceed 200°C for pulsed conditions with low duty cycle or non- repetitive. - For additional information on our Pb- Free strategy and soldering details, please download the onsemi Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Cathode DATA SHEET .onsemi. Anode AXIAL LEAD CASE 017AA PLASTIC MARKING DIAGRAM A 1N 53xx B YYWWG G = Assembly Location 1N53xx B = Device Number (Refer to Tables on Pages 3 & 4) = Year = Work...