Datasheet4U Logo Datasheet4U.com

ADT7473 - Remote Thermal Monitor and Fan Control

General Description

Digital Input (Open Drain).

SMBus serial clock input.

Requires SMBus pullup.

Key Features

  • Controls and Monitors Up to 4 Fans.
  • High and Low Frequency Fan Drive Signal.
  • 1 On-Chip and 2 Remote Temperature Sensors.
  • Series Resistance Cancellation on the Remote Channel.
  • Extended Temperature Measurement Range, Up to 191°C.
  • Dynamic TMIN Control Mode Intelligently Optimizes System Acoustics.
  • Automatic Fan Speed Control Mode Controls System Cooling Based on Measured Temperature.
  • Enhanced Acoustic Mode Dramatically Reduces.

📥 Download Datasheet

Datasheet Details

Part number ADT7473
Manufacturer onsemi
File Size 618.17 KB
Description Remote Thermal Monitor and Fan Control
Datasheet download datasheet ADT7473 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADT7473 dBCool Remote Thermal Monitor and Fan Controller Analog Devices
ADT7470 Temperature Sensor Hub and Fan Controller Analog Devices
ADT7475 dBCool Remote Thermal Monitor and Fan Controller Analog Devices
ADT7476 dBCool Remote Thermal Controller and Voltage Monitor Analog Devices
ADT7476A dBCool Remote Thermal Controller and Voltage Monitor Analog Devices

Other Datasheets by onsemi

Part Number Description
ADT7475 Remote Thermal Monitor and Fan Controller
ADT7476 Remote Thermal Controller and Voltage Monitor
ADT7476A Remote Thermal Controller and Voltage Monitor
ADT7421 Precision Temperature Sensor
ADT7461 Temperature Monitor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADT7473 Remote Thermal Monitor and Fan Control The ADT7473/ADT7473−1 controller is a thermal monitor and multiple PWM fan controller for noise sensitive or power sensitive applications requiring active system cooling. The ADT7473/ADT7473−1 can drive a fan using either a low or high frequency drive signal, monitor the temperature of up to two remote sensor diodes plus its own internal temperature, and measure and control the speed of up to four fans so they operate at the lowest possible speed for minimum acoustic noise. The automatic fan speed control loop optimizes fan speed for a given temperature. A unique dynamic TMIN control mode enables the system thermals/acoustics to be intelligently managed.