AMIS-42671 - High Speed Autobaud CAN Transceiver

onsemi

General Description

The AMIS

between a controller area network (CAN) protocol controller and the physical bus.

It may be used in both 12 V and 24 V systems.

Key Features

Fully compatible with the ISO 11898.
2 standard.
Autobaud function.
Wide range of bus communication speed (0 up to 1 Mbit/s).
Allows low transmit data rate in networks exceeding 1 km.
Ideally suited for 12 V and 24 V industrial and automotive.

📥 Download Datasheet

AMIS-42671 high speed autobaud can transceiver by onsemi - Datasheet Preview

Datasheet Details

Part number	AMIS-42671
Manufacturer	onsemi
File Size	173.32 KB
Description	High Speed Autobaud CAN Transceiver
Datasheet	AMIS-42671 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
AMIS-42671	High-Speed CAN Transceiver	AMI SEMICONDUCTOR
AMIS-42673	High-Speed CAN Transceiver	AMI SEMICONDUCTOR
AMIS-42675	High-Speed Low Power CAN Transceiver	AMI SEMICONDUCTOR
AMIS-40615	LIN Transceiver	AMI SEMICONDUCTOR
AMIS-40616	LIN Transceiver	AMI SEMICONDUCTOR

Other Datasheets by onsemi

Part Number	Description
AMIS-42670	High-Speed CAN Transceiver
AMIS-42665	High-Speed Low Power CAN Transceiver
AMIS-42700	Dual High Speed CAN Transceiver
AMIS-42770	Dual High Speed CAN Transceiver
AMIS-41682	Fault Tolerant CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

AMIS-42671 High Speed Autobaud CAN Transceiver General Description The AMIS−42671 CAN transceiver with autobaud is the interface between a controller area network (CAN) protocol controller and the physical bus. It may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide common−mode voltage range of the receiver inputs, the AMIS−42671 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals. The AMIS−42671 is primarily intended for industrial network applications where long network lengths are mandatory.