Datasheet4U Logo Datasheet4U.com

CS5322 - Two-Phase Buck Controller

Features

  • Enhanced V2 Control Method.
  • 5.
  • Bit DAC with 1.0% Accuracy.
  • Adjustable Output Voltage Positioning.
  • 4 On.
  • Board Gate Drivers.
  • 200 kHz to 800 kHz Operation Set by Resistor.
  • Current Sensed through Buck Inductors, Sense Resistors, or V.
  • S Control.
  • Hiccup Mode Current Limit.
  • Individual Current Limits for Each Phase.
  • On.
  • Board Current Sense Amplifiers.
  • 3.3 V, 1.0 mA Reference Output.

📥 Download Datasheet

Datasheet Details

Part number CS5322
Manufacturer onsemi
File Size 428.52 KB
Description Two-Phase Buck Controller
Datasheet download datasheet CS5322 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS5322 24-Bit Variable Bandwidth A/D Converter Chipset Cirrus Logic
CS5320 24-Bit Variable Bandwidth A/D Converter Chipset Cirrus Logic
CS5321 24-Bit Variable Bandwidth A/D Converter Chipset Cirrus Logic
CS5326 Stereo A/D Converter Cirrus Logic
CS5327 Stereo A/D Converter Cirrus Logic

Other Datasheets by onsemi

Part Number Description
CS5323 Two-Phase Buck Controller
CS5301 Three-Phase Buck Controller
CS5302 Two-Phase Buck Controller
CS5303 Three-Phase Buck Controller
CS5304 Three-Phase Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS5322 Two−Phase Buck Controller with Integrated Gate Drivers and 5−Bit DAC The CS5322 is a two −phase step down controller which incorporates all control functions required to power high performance processors and high current power supplies. Proprietary multi−phase architecture guarantees balanced load current distribution and reduces overall solution cost in high current applications. Enhanced V2™ control architecture provides the fastest possible transient response, excellent overall regulation, and ease of use. The CS5322 multi−phase architecture reduces output voltage and input current ripple, allowing for a significant reduction in inductor values and a corresponding increase in inductor current slew rate.
Published: |