Datasheet4U Logo Datasheet4U.com

CS7054 - Low Side PWM FET Controller

Description

PACKAGE PIN # DIP 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 SO 16L 1 2 3 4 5 6 7, 8, 15 9 10 11 12 13 14 16 PIN SYMBOL OUTPUT GND FLT COSC ROSC CTL NC VREG ISENSE

ISENSE+ IADJ INH PGND VCC FUNCTION MOSFET Gate Drive.

Ground.

Fault time out capacitor.

Features

  • s 200 mA Peak PWM Gate Drive Output Patented Voltage Compensation Circuit 100% Duty Cycle Capability 5.0 V, ± 3.0% Linear Regulator Low Current Sleep Mode Overvoltage Protection Overcurrent Protection of External MOSFET/IGBT Output Inhibit SO.
  • 16L A WL, L YY, Y WW, W = Assembly Location = Wafer Lot = Year = Work Week.

📥 Download Datasheet

Datasheet Details

Part number CS7054
Manufacturer onsemi
File Size 117.85 KB
Description Low Side PWM FET Controller
Datasheet download datasheet CS7054 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS7054 Low Side PWM FET Controller Cherry Semiconductor Corporation
CS70-B2GA101KYNS Disk Ceramic Capacitors TDK
CS70-B2GA151KYNS Disk Ceramic Capacitors TDK
CS70-B2GA221KYNS Disk Ceramic Capacitors TDK
CS70N06A4 Silicon N-Channel Power MOSFET CR Micro

Other Datasheets by onsemi

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS7054 Low Side PWM FET Controller The CS7054 is a monolithic integrated circuit designed primarily to control the rotor speed of permanent magnet, direct current (DC) brush motors. It drives the gate of an N channel power MOSFET or IGBT with a user–adjustable, fixed frequency, variable duty cycle, pulse width modulated (PWM) signal. The CS7054 can also be used to control other loads such as incandescent bulbs and solenoids. Inductive current from the motor or solenoid is recirculated through an external diode. The CS7054 accepts a DC level input signal of 0 to 5.0 V to control the pulse width of the output signal. This signal can be generated by a potentiometer referenced to the on–chip 5.
Published: |