Datasheet4U Logo Datasheet4U.com

CS8129 - Low Dropout Linear Regulator

Features

  • 5.0 V ±3.0% Regulated Output.
  • Low Dropout Voltage (0.6 V @ 0.5 A).
  • 750 mA Output Current Capability.
  • Reduced RESET Threshold for Use with 4.0 V Microprocessors.
  • Externally Programmed RESET Delay.
  • Fault Protection.
  • Reverse Battery.
  • 60 V,.
  • 50 V Peak Transient Voltage.
  • Short Circuit.
  • Thermal Shutdown.
  • These are Pb.
  • Free Devices http://onsemi. com.

📥 Download Datasheet

Datasheet Details

Part number CS8129
Manufacturer onsemi
File Size 221.17 KB
Description Low Dropout Linear Regulator
Datasheet download datasheet CS8129 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS8129 5V 750mA Low Dropout Linear Regulator Cherry Semiconductor Corporation
CS8120 5V/ 300mA Linear Regulator with and ENABLE RESET Cherry Semiconductor Corporation
CS8121 5V/ 1A Linear Regulator with and ENABLE RESET Cherry Semiconductor Corporation
CS8121S Filterless Class-D audio amplifier Chipstar Micro-electronics
CS8122 2% 5V 750mA Low Dropout Linear Regulator Cherry Semiconductor Corporation

Other Datasheets by onsemi

Part Number Description
CS8120 Linear Regulator
CS8122 Low Dropout Linear Regulator
CS8126 Low Dropout Linear Regulator
CS8101 Low Dropout Linear Regulator
CS8147 Low Dropout Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CS8129 5.0 V, 750 mA Low Dropout Linear Regulator with Lower RESET Threshold The CS8129 is a precision 5.0 V linear regulator capable of sourcing 750 mA. The RESET threshold voltage has been lowered to 4.2 V so that the regulator can be used with 4.0 V microprocessors. The lower RESET threshold also permits operation under low battery conditions (5.5 V plus a diode). The RESET’s delay time is externally programmed using a discrete RC network. During powerup, or when the output goes out of regulation, RESET remains in the low state for the duration of the delay. This function is independent of the input voltage and will function correctly as long as the output voltage remains at or above 1.0 V. Hysteresis is included in the Delay and the RESET comparators to improve noise immunity.
Published: |