Datasheet4U Logo Datasheet4U.com

CS8312 - IGBT

Description

PIN SYMBOL FLAG SENSE+ SENSE GND OUT CLI

Features

  • µP Compatible Inputs.
  • Adjustable Current Limit Thresholds.
  • External Sense Resistor.
  • Flag Signal to Indicate Output Status VCC CTRL FLAG Control Logic VT Latch VT Gate Driver 5.0 V OUT SENSE+ VREF http://onsemi. com 8 1 DIP.
  • 8 N SUFFIX CASE 626.

📥 Download Datasheet

📁 Similar Datasheet

  • CS8312 - IGBT Ignition Predriver (Cherry Semiconductor Corporation)
  • CS8316C - 25W output power Class-R mono audio power amplifier (ChipSourceTek)
  • CS830 - VDMOS Transistors (ETC)
  • CS830 - N-Channel MOSFET (LZG)
  • CS8302 - Filter-Free Class-D Audio Amplifier (ChipSourceTek)
  • CS8302M - Filter-Free Class-D Audio Amplifier (ChipSourceTek)
  • CS8305E - 5.0W mono / ultra-low EMI / filterless Class-D audio amplifier (Chipstar Micro-electronics)
  • CS830A3RD - Silicon N-Channel Power MOSFET (Huajing Microelectronics)
  • CS830A4RD - Silicon N-Channel Power MOSFET (Huajing Microelectronics)
  • CS830A8RD - Silicon N-Channel Power MOSFET (Huajing Microelectronics)
Other Datasheets by ON Semiconductor
  • CS8321 - Low Dropout Linear Regulator
  • CS8361 - 5.0V Dual Micropower Low Dropout Regulator
  • CS8363 - 3.3V Dual Micropower Regulator
  • CS8371 - Dual Regulator
  • CS8391 - Micropower Low Dropout Regulator
  • CS8101 - Low Dropout Linear Regulator
  • CS8120 - Linear Regulator
  • CS8122 - Low Dropout Linear Regulator

Full PDF Text Transcription

Click to expand full text
CS8312 IGBT Ignition Predriver with Dynamic Current Regulation The CS8312 is a bipolar microprocessor interface IC designed to drive an IGBT (or logic level MOSFETs) powering large inductive loads in harsh operating environments. The IC’s dynamic current limit function lets the microprocessor adjust the current limit threshold to the real time needs of the system. CLI, the current limit input, sets the current limit for the IGBT high or low as directed by the system microprocessor. CLI also raises and lowers the threshold on the diagnostic FLAG output signal. The FLAG output signals the microprocessor when the current level approaches current limit on the IGBT. The CTRL input enables the FLAG function.
Published: |