Datasheet4U Logo Datasheet4U.com

CS8363 - 3.3V Dual Micropower Regulator

Description

FUNCTION Standby output voltage delivering 100 mA.

Input voltage.

Tracking output voltage controlled by ENABLE delivering 250 mA.

Features

  • 2 Regulated Outputs.
  • Standby Output 3.3 V.
  • 2%, +2.4%; 100 mA.
  • Adjustable Tracking Output; 250 mA.
  • Operation down to VIN = 4.5 V.
  • RESET for VSTBY.
  • ENABLE for VTRK.
  • Low Quiescent Current.
  • Protection Features.
  • Independent Thermal Shutdown.
  • Short Circuit.
  • 60 V Load Dump.
  • Reverse Battery http://onsemi. com 1 D2PAK.
  • 7 DPS SUFFIX CASE 936AB Pin 1. VSTBY 2. VIN 3. VTRK 4. GND 5.

📥 Download Datasheet

Datasheet Details

Part number CS8363
Manufacturer onsemi
File Size 134.64 KB
Description 3.3V Dual Micropower Regulator
Datasheet download datasheet CS8363 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS83601E 11W output power Class-R mono audio power amplifier ChipSourceTek
CS8361 5V Dual Micropower Low Dropout Regulator Cherry Semiconductor Corporation
CS830 VDMOS Transistors ETC
CS830 N-Channel MOSFET LZG
CS8302 Filter-Free Class-D Audio Amplifier ChipSourceTek

Other Datasheets by onsemi

Part Number Description
CS8361 5.0V Dual Micropower Low Dropout Regulator
CS8312 IGBT
CS8321 Low Dropout Linear Regulator
CS8371 Dual Regulator
CS8391 Micropower Low Dropout Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CS8363 3.3 V Dual Micropower Regulator with ENABLE and RESET The CS8363 is a precision Micropower dual voltage regulator with ENABLE and RESET. The 3.3 V standby output is accurate within −2%, +2.4% while supplying loads of 100 mA. Quiescent current is low, typically 140 mA with a 300 mA load. The active RESET output monitors the 3.3 V standby output and is low during power−up and regulator dropout conditions. The RESET circuit includes hysteresis and is guaranteed to operate correctly with 1.0 V on the standby output. The second output tracks the 3.3 V standby output through an external adjust lead, and can supply loads of 250 mA. The logic level lead ENABLE is used to control this tracking regulator output.
Published: |