FAN49103 - Buck-Boost Regulator

Product Overview

ON Semiconductor

Datasheet Details

Part number	FAN49103
Manufacturer	ON Semiconductor
File Size	1.55 MB
Description	Buck-Boost Regulator
Datasheet	FAN49103 Datasheet
Additional preview pages of the FAN49103 datasheet.

Product details

Description

The FAN49103 is a high efficiency buck boost switching mode regulator which accepts input voltages either above or below the regulated output voltage.Using full bridge architecture with synchronous rectification, the FAN49103 is capable of delivering up to 2.5 A while regulating the output at 3.4 V. up and step down modes reducing output disturbances.

Features

24 mA Typical PFM Quiescent Current.
Above 95% Efficiency.
Total Layout Area = 11.61 mm2.
Input Voltage Range: 2.5 V to 5.5 V.
Maximum Continuous Load Current:.
3.0 A at VOUT = 3.4 V, VIN = 3.3 V.
2.5 A at VOUT = 3.4 V, VIN = 3.0 V.
2.0 A at VOUT = 3.4 V, VIN = 2.5 V.
I2C Compatible Interface.
Programmable Output Voltage:.
2.5 V to 2.8 V in 50 mV Steps.
2.8 V to 4.0 V in 25 mV Steps.

📁 Similar Datasheet

FAN4931 - Ultra-Low Cost - Rail To Rail I/O for CMOS Amplifier (Fairchild Semiconductor)
FAN400A - Low-Power Green-Mode PWM Flyback Power Controller (Fairchild Semiconductor)
FAN400C - PWM Flyback Power Controller (Fairchild Semiconductor)
FAN4010 - High-Side Current Sensor (Fairchild Semiconductor)
FAN4040 - Precision Micropower Shunt Voltage Reference (Fairchild Semiconductor)
FAN4041 - Precision Micropower Shunt Voltage Reference (Fairchild Semiconductor)
FAN4113 - 1.2V/ 36MHz/ Low Power Rail-to-Rail Amplifier (Fairchild Semiconductor)
FAN4147 - Ground Fault Interrupter (Fairchild Semiconductor)

Other Datasheets by ON Semiconductor

FAN49101 - Buck-Boost Regulator
FAN4146 - Ground Fault Interrupter
FAN4174 - CMOS Amplifier
FAN4274 - CMOS Amplifier
FAN4800AS - PFC/PWM Controller Combination
FAN4800CS - PFC/PWM Controller Combination

Published: Oct 31, 2023 |