FR014H5JZ Datasheet | onsemi

Description Reverse bias is an increasingly mon fault event that may be generated by user error, improperly installed batteries, automotive environments, erroneous connections to third- party chargers, negative “hot plug” transients, inductive transients, and readily available negatively biased rouge USB chargers. onsemi circuit protection is proud to offer a new type of reverse bias protection devices. The FR devices are low resistance, series switches that, in the event of a reverse bias condition, shut off power and block the negative voltage to help protect downstream circuits. The FR devices are optimized for the application to offer best in class reverse bias protection and voltage capabilities while minimizing size, series voltage drop, and normal operating power consumption. In the event of a reverse bias application, FR014H5JZ devices effectively provide a full voltage block and can easily protect - 0.3 V rated silicon. From a power perspective, in normal bias, a 14 m W FR device in a 1.5 A application will generate only 21 m V of voltage drop or 32 m W of power loss. In reverse bias, FR devices dissipate less then 20 m W in a 16 V reverse bias event. This type of performance is not possible with a diode solution. Benefits extend beyond the device. Due to low power dissipation, not only is the device small, but heat sinking requirements and cost can be minimized as well. Features - Up to - 30 V Reverse- Bias Protection - Nano Seconds of Reverse- Bias Blocking Response Time - +32 V 24- Hour “Withstand” Rating - 14 m W Typical Series Resistance at 5 V - Integrated TVS Over Voltage Suppression - MLP 3.3 x 3.3 Package Size - USB Tested and patible - This Device is Pb- Free, Halide Free and is Ro HS pliant Applications - USB 1.0, 2.0 and 3.0 Devices - USB Charging - Mobile Devices - Mobile Medical - POS Systems - Toys © Semiconductor ponents Industries, LLC, 2012 September, 2022 - Rev. 3 Pin 1 NEG CTL Top Bottom WDFN8 3.3 x 3.3, 0.65P (MLP 3.3 x 3.3) CASE...