FSTU32160 - 16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch

onsemi

General Description

The ON Semiconductor Switch FSTU32160 is a 16 bit to 32 bit highspeed CMOS TTL

compatible multiplexer/demultiplexer bus switch.

Key Features

Undershoot hardened to.
2 V (A and B Ports).
Slower Output Enable Times prevent Signal Disruption.
4 W Switch Connection between Two Ports.
Minimal Propagation Delay through the Switch.
Low ICC.
Zero Bounce in Flow.
through Mode.
Control Inputs Compatible with TTL Level.
See.

📥 Download Datasheet

FSTU32160 16-bit to 32-bit multiplexer/demultiplexer bus switch by onsemi - Datasheet Preview

Datasheet Details

Part number	FSTU32160
Manufacturer	onsemi
File Size	220.57 KB
Description	16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch
Datasheet	FSTU32160 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
FSTU32160	16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch	Fairchild Semiconductor
FSTU32160A	16-Bit to 32-Bit Multiplexer/Demultiplexer Bus Switch	Fairchild Semiconductor
FSTU3253	Dual 4:1 Multiplexer/Demultiplexer Bus Switch	Fairchild Semiconductor
FSTU3257	Quad 2:1 Multiplexer/Demultiplexer Bus Switch with -2V Undershoot Protection	Fairchild Semiconductor
FSTU32X384	20-Bit Low Power Bus Switch with -2V Undershoot Protection	Fairchild Semiconductor

Other Datasheets by onsemi

Part Number	Description
FST3125	4-Bit Bus Switch
FST3126	4-Bit Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

16-Bit to 32-Bit Multiplexer/ Demultiplexer Bus Switch with -2 V Undershoot Protection FSTU32160 General Description The ON Semiconductor Switch FSTU32160 is a 16−bit to 32−bit highspeed CMOS TTL−compatible multiplexer/demultiplexer bus switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device can be used in applications where two buses need to be addressed simultaneously. The FSTU32160 is designed so that the A Port demultiplexes into B1 or B2 or both. The A and B Ports have “undershoot hardened” circuit protection to support an extended range to 2.0 V below ground.