Datasheet4U Logo Datasheet4U.com

FUSB3307 - USB Power Delivery 3.0 Adaptive Source Charging Controller

Description

See detailed pin description information on page 5 of this data sheet.

See detailed ordering and shipping information on page 6 of this data sheet.

Rev.

Features

  • PD 3.0 v2.0 and Type.
  • C 2.0 Compliant.
  • Constant Voltage (CV) and Constant Current Limit (CL) Regulation.
  • Small Current Sensing Resistor (5 mW) for High Efficiency.
  • Gate Driver for N.
  • Channel MOSFET as a Load Switch.
  • CC1/CC2 Pin Protection up to 26 V.
  • Selectable Resistor Divider or Battery Charging (BC1.2) Modes.
  • Built.
  • in Output Capacitor Discharging Resistance.
  • Adaptive UVP, Adaptive OVP, I_OTP, E_OTP,.

📥 Download Datasheet

Datasheet Details

Part number FUSB3307
Manufacturer onsemi
File Size 594.59 KB
Description USB Power Delivery 3.0 Adaptive Source Charging Controller
Datasheet download datasheet FUSB3307 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FUSB300C Programmable USB Type-C Controller Fairchild Semiconductor
FUSB302 Programmable USB Type-C Controller Fairchild Semiconductor
FUSB303 FUSB303 Autonomous USB Port Controller onsemi
FUSB380C Autonomous USB Type-C Passive Cable Marker onsemi
FUSB1500 USB2.0 Full-Speed / Low-Speed Transceiver Fairchild Semiconductor

Other Datasheets by onsemi

Part Number Description
FUSB3317 Automotive USB Power Delivery Source Controller
FUSB301 Autonomous USB Type-C Controller
FUSB301A Autonomous USB Type-C Controller
FUSB302 Programmable USB Type-C Controller
FUSB302B Programmable USB Type-C Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATA SHEET www.onsemi.com USB Power Delivery 3.0 Adaptive Source Charging Controller FUSB3307 FUSB3307 is a highly integrated USB Power Delivery (PD) power source controller that can control a DC−DC port power regulator or the opto−coupler in the secondary side of an AC−DC adapter. It implements the Source finite state machines of USB Power Delivery 3.0 (PD 3.0) and Type−C™ which includes Programmable Power Supplies (PPS). In order to meet the PPS specification, FUSB3307 supports minimum 3.3 V and maximum 21 V output voltage control. It includes Constant Voltage (CV) and Constant Current Limit (CL) control blocks. The references are supported from internal D/A converters.
Published: |