KAI-08051 Datasheet | onsemi

3296 (H) x 2472 (V) Interline CCD Image Sensor Description The KAI- 08051 Image Sensor is an 8- megapixel CCD in a 4/3” optical format that provides increased QE, reduced read noise, and improved color accuracy pared to earlier generation devices in the TRUESENSE 5.5 micron Interline Transfer CCD family. The sensor Features broad dynamic range, excellent imaging performance, and a flexible readout architecture that enables use of 1, 2, or 4 outputs. Full resolution readout is supported at up to 16 frames per second, a Region of Interest (ROI) mode supports partial readout of the sensor at even higher frame rates. The sensor is available with the TRUESENSE Sparse Color Filter Pattern, which provides a 2x improvement in light sensitivity pared to a standard color Bayer part. The sensor shares mon pin- out and electrical configurations with other devices based on the TRUESENSE 5.5 micron Interline Transfer Platform, allowing a single camera design to support multiple members of this family. Table 1. GENERAL SPECIFICATIONS Parameter Typical Value Architecture Interline CCD; Progressive Scan Total Number of Pixels 3364 (H) x 2520 (V) Number of Effective Pixels 3320 (H) x 2496 (V) Number of Active Pixels 3296 (H) x 2472 (V) Pixel Size Active Image Size 5.5 mm (H) x 5.5 mm (V) 18.13 mm (H) x 13.60 mm (V) 22.66 mm (diag), 4/3” optical format Aspect Ratio 4:3 Number of Outputs 1, 2, or 4 Charge Capacity 20,000 electrons Output Sensitivity 39 m V/e- Quantum Efficiency RGB (- FXA- JD, - FXA- JP (no glass), - QXP- JD) RGB (- FBA- JD, - FBA- JP (no glass)) Mono, PAN (- AAA- JP) Mono (- AXA- JD, - AXA- JP (no glass)) Mono (- ABA-...