Datasheet4U Logo Datasheet4U.com

LC717A10AJ - Capacitance-Digital-Converter LSI

Key Features

  • Detection System: Differential Capacitance Detection (Mutual Capacitance Type).
  • Input Capacitance Resolution: Can Detect Capacitance Changes in the Femto Farad Order.
  • Measurement Interval (16 Differential Inputs):.
  • 30 ms (Typ) (at Initial Configuration).
  • 6 ms (Typ) (at Minimum Interval Configuration).
  • External Components for Measurement: Not Required.
  • Current Consumption:.
  • 570 mA (Typ) (VDD = 2.8 V).
  • 1.3 mA (Typ) (.

📥 Download Datasheet

Datasheet Details

Part number LC717A10AJ
Manufacturer onsemi
File Size 247.99 KB
Description Capacitance-Digital-Converter LSI
Datasheet download datasheet LC717A10AJ Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC717A10AJ Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A10AR Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A00AJ Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC717A00AR Capacitance-Digital-Converter LSI Sanyo Semicon Device
LC7120 CMOS LSI 27MHz CB TRANSCEIVER PLL FREQUENCY SYNTHESIZER Sanyo Semicon Device

Other Datasheets by onsemi

Part Number Description
LC717A10AR Capacitance-Digital-Converter LSI
LC717A10PJ Capacitance-Digital-Converter LSI
LC717A00AJ Capacitance-Digital-Converter LSI
LC717A00AR Capacitance-Digital-Converter LSI
LC717A00ARGEVK Capacitance-Digital-Converter IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LC717A10AJ Capacitance‐Digital‐Converter LSI for Electrostatic Capacitive Touch Sensors Overview The LC717A10AJ is a high-performance and low-cost capacitance-digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability. It has 16 channels capacitance-sensor input. This makes it ideal for use in the products that need many switches. Since the calibration function and the judgment of ON/OFF are automatically performed in LSI internal, it can make development time more short. A detection result (ON/OFF) for each input can be read out by the serial interface (I2C compatible bus or SPI). Also, measurement value of each input can be read out as 8-bit digital data. Moreover, gain and other parameters can be adjusted using serial interface.