900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

LC87F5N62B Datasheet

8-bit 1-chip Microcontroller

No Preview Available !

Ordering number : ENA1035
LC87F5N62B
CMOS IC
FROM 66K byte, RAM 2048 byte on-chip
8-bit 1-chip Microcontroller
http://onsemi.com
Overview
The LC87F5N62B is an 8-bit microcomputer that, centered around a CPU running at a minimum bus cycle time of
83.3ns, integrate on a single chip a number of hardware features such as 66K-byte flash ROM (onboard rewritable),
2048byte RAM, Onchip debugging function, sophisticated 16-bit timers/counters (may be divided into 8-bit timers), a
16-bit timer/counter (may be divided into 8-bit timers/counters or 8-bit PWMs), four 8-bit timers with a prescaler, a
base timer serving as a time-of-day clock, a high-speed clock counter, two synchronous SIO ports (with automatic
block transmission/reception capabilities), an asynchronous/synchronous SIO port, two UART ports (full duplex),
four 12-bit PWM channels, an 8-bit 15-channel AD converter, a system clock frequency divider, and a 29-source 10-
vector interrupt feature.
Features
Flash ROM
Capable of on-board-programing with wide range, 2.7 to 5.5V, of voltage source
Block-erase in 128-byte units
67584 × 8 bits ( Address: 00000H to 0FFFFH, 1F800H to 1FFFFH)
RAM
2048 × 9 bits
Minimum Bus Cycle Time
83.3ns (12MHz)
125ns (8MHz)
500ns (2MHz)
VDD=2.8 to 5.5V
VDD=2.5 to 5.5V
VDD=2.2 to 5.5V
Note: Bus cycle time indicates the speed to read ROM.
* This product is licensed from Silicon Storage Technology, Inc. (USA).
Semiconductor Components Industries, LLC, 2013
May, 2013
Ver.1.00
31908HKIM 20080117-S00006 No. A1035-1/25


  ON Semiconductor Electronic Components Datasheet  

LC87F5N62B Datasheet

8-bit 1-chip Microcontroller

No Preview Available !

Minimum Instruction Cycle Time (tCYC)
250ns (12MHz)
375ns (8MHz)
1.5μs (2MHz)
VDD=2.8 to 5.5V
VDD=2.5 to 5.5V
VDD=2.2 to 5.5V
LC87F5N62B
Ports
Normal withstand voltage I/O ports
Ports whose I/O direction can be designated in 1-bit units
Ports whose I/O direction can be designated in 2-bit units
Ports whose I/O direction can be designated in 4-bit units
Normal withstand voltage input port
Dedicated oscillator ports
Reset pins
Power pins
64 (P1n, P2n, P3n, P70 to P73, P8n, PAn, PBn, PCn,
S2Pn, PWM0, PWM1, XT2)
16 (PEn, PFn)
8 (P0n)
1 (XT1)
2 (CF1, CF2)
1 (RES)
8 (VSS1 to VSS4, VDD1 to VDD4)
Timers
Timer 0: 16-bit timer/counter with a capture register
Mode 0: 8-bit timer with an 8-bit programmable prescaler (with an 8-bit capture registers) ×2 channels
Mode 1: 8-bit timer with an 8-bit programmable prescaler (with an 8-bit capture registers)
+ 8-bit counter (with an 8-bit capture registers)
Mode 2: 16-bit timer with an 8-bit programmable prescaler (with 16-bit capture registers)
Mode 3: 16-bit counter (with 16-bit capture registers)
Timer 1: 16-bit timer/counter that support PWM/toggle output
Mode 0: 8-bit timer with an 8-bit prescaler (with toggle outputs) + 8-bit timer/counter(with toggle outputs)
Mode 1: 8-bit PWM with an 8-bit prescaler × 2 channels
Mode 2: 16-bit timer/counter with an 8-bit prescaler (with toggle outputs)
(toggle outputs also from the lower-order 8-bits)
Mode 3: 16-bit timer with an 8-bit prescaler (with toggle outputs) (The lower-order 8 bits can be used as PWM.)
Timer 4: 8-bit timer with a 6-bit prescaler
Timer 5: 8-bit timer with a 6-bit prescaler
Timer 6: 8-bit timer with a 6-bit prescaler (with toggle outputs)
Timer 7: 8-bit timer with a 6-bit prescaler (with toggle outputs)
Base timer
1) The clock is selectable from the subclock (32.768kHz crystal oscillation), system clock, and timer 0 prescaler
output.
2) Interrupts programmable in 5 different time schemes.
High-speed Clock Counter
1) Can count clocks with a maximum clock rate of 24MHz (at a main clock of 12MHz).
2) Can generate output real-time.
SIO
SIO0: 8-bit synchronous serial interface
1) LSB first/MSB first mode selectable
2) Built-in 8-bit baudrate generator (maximum transfer clock cycle = 4/3 tCYC)
3) Automatic continuous data transmission (1 to 256 bits, specifiable in 1-bit units, suspension and resumption of
data transmission possible in 1-byte units)
SIO1: 8-bit asynchronous/synchronous serial interface
Mode 0: Synchronous 8-bit serial I/O (2- or 3-wire configuration, 2 to 512 tCYC transfer clocks)
Mode 1: Asynchronous serial I/O (half-duplex, 8 data bits, 1 stop bit, 8 to 2048 tCYC baudrates)
Mode 2: Bus mode 1 (start bit, 8 data bits, 2 to 512 tCYC transfer clocks)
Mode 3: Bus mode 2 (start detect, 8 data bits, stop detect)
SIO2: 8 bit synchronous serial interface
1) LSB first mode
2) Built-in 8-bit baudrate generator (maximum transfer clock cycle = 4/3 tCYC)
3) Automatic continuous data transmission (1 to 32 bytes)
No.A1035-2/25


Part Number LC87F5N62B
Description 8-bit 1-chip Microcontroller
Maker ON Semiconductor
Total Page 25 Pages
PDF Download

LC87F5N62B Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 LC87F5N62B 8-bit 1-chip Microcontroller
Sanyo Semicon Device
2 LC87F5N62B 8-bit 1-chip Microcontroller
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy