900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




  ON Semiconductor Electronic Components Datasheet  

LC898213XC Datasheet

AF Controller

No Preview Available !

Ordering number : EN*A2251
LC898213XC
Advance Information
CMOS LSI
AF Controller
http://onsemi.com
Overview
This LSI is AF control LSI. It consists of 1 system of feed back circuit for AF control.
Features
Built-in equalizer circuit using digital operation
- AF control equalize circuit
- Any coefficient can be specified by I2C I/F
I2C Interface
Built-in A/D converter
- Maximum 10-bit
- Input 2 channel
Built-in D/A converter
- 8-bit
- Output 2-channel (Hall offset, Constant current Bias)
Built-in Hall Sensor
- Si Hall sensor
Built-in VGA
- Hall Amp
Built-in OSC
- 48MHz (Frequency adjustment function)
Built-in PWM pulse generator circuit
- PWM circuit for AF control
1-chip motor driver
- Saturation drive H bridge 1 channel
Package
- WL-CSP 11-pin
- Lead-free, halogen-free
Supply voltage
- Logic unit : Internal core (1.7V to 1.98V), AVDD (2.6V to 3.6V)
- Driver unit : VM (2.6V to 3.6V)
WLCSP11, 1.10x2.20
* I2C Bus is a trademark of Philips Corporation.
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
ORDERING INFORMATION
See detailed ordering and shipping information on page 5 of this data sheet.
Semiconductor Components Industries, LLC, 2014
March, 2013
31014HK No.A2251-1/5


  ON Semiconductor Electronic Components Datasheet  

LC898213XC Datasheet

AF Controller

No Preview Available !

Pin Description
I INPUT
O OUTPUT
B BIDIRECTION
I2C interface
I2CCK
I2CDT
Hall interface
HALL
Driver interface
OUT1
OUT2
Power supply pin
VDD
VSS
VDDO
VM
PGND
Test pin
TEST
LC898213XC
TYPE
P Power supply,
GND
NC NOT CONNECT
B I2C Clock pin
B I2C Data pin
O Hall amp output
O Actuator output pin
O Actuator output pin
P Digital power supply
P Digital GND
P LDO power supply out
P Motor power supply
P Power GND
O Test pin
*Process when pins are not used
PIN TYPE “O” – Ensure that it is set to OPEN.
PIN TYPE “I” – OPEN is inhibited. Ensure that it is connected to the Vdd or Vss even when it is unused.
(Please contact ON Semiconductor company for more information about selection of Vdd or Vss.)
PIN TYPE “B” – If you are unsure about processing method on the pin description of pin layout table, please contact us.
Note that incorrect processing of unused pins may result in defects.
No.A2251-2/5


Part Number LC898213XC
Description AF Controller
Maker ON Semiconductor
PDF Download

LC898213XC Datasheet PDF






Similar Datasheet

1 LC898213XC AF Controller
ON Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy