MC33501 Datasheet | onsemi

MC33501, MC33503 1.0 V, Rail- to- Rail, Single Operational Amplifiers The MC33501/503 operational amplifier provides rail- to- rail operation on both the input and output. The output can swing within 50 m V of each rail. This rail- to- rail operation enables the user to make full use of the entire supply voltage range available. It is designed to work at very low supply voltages (1.0 V and ground), yet can operate with a supply of up to 7.0 V and ground. Output current boosting techniques provide high output current capability while keeping the drain current of the amplifier to a minimum. Features http://onsemi. MARKING DIAGRAM 5 5 1 SOT23- 5 SN SUFFIX CASE 483 1 = AAA; MC33501 AAB; MC33503 A = Assembly Location Y = Year WW = Work Week G = Pb- Free Package (Note: Microdot may be in either location) xxx xxx AYWG G - Low Voltage, Single Supply Operation (1.0 V and Ground to 7.0 V - - - - - - - - - - - - - - - - - - - - - and Ground) High Input Impedance: Typically 40 f A Input Bias Current Typical Unity Gain Bandwidth @ 5.0 V = 4.0 MHz, @ 1.0 V = 3.0 MHz High Output Current (ISC = 40 m A @ 5.0 V, 13 m A @ 1.0 V) Output Voltage Swings within 50 m V of Both Rails @ 1.0 V Input Voltage Range Includes Both Supply Rails High Voltage Gain: 100 d B Typical @ 1.0 V No Phase Reversal on the Output for Over- Driven Input Signals .. Typical Input Offset of 0.5 m V Low Supply Current (ID = 1.2 m A/per Amplifier, Typical) 600 W Drive Capability Extended Operating Temperature Range (- 40 to 105°C) Pb- Free Packages are Available PIN CONNECTIONS MC33501 Output 1 VCC 2 Non- Inverting Input 3 (Top View) + - 4 Inverting Input 5 VEE Applications Single Cell Ni Cd/Ni MH Powered Systems Interface to DSP Portable munication Devices Low Voltage Active Filters Telephone Circuits Instrumentation Amplifiers Audio Applications Power Supply Monitor and Control Transistor Count: 98 MC33503 Output 1 VEE 2 Non- Inverting Input 3 (Top View) + - 4 Inverting Input 5 VCC ORDERING INFORMATION Dev...