MC74HCT241A - Octal 3-State Noninverting Buffer/Line Driver/Line Receiver

onsemi

Key Features

Output Drive Capability: 15 LSTTL Loads.
TTL/NMOS Compatible Input Levels.
Outputs Directly Interface to CMOS, NMOS, and TTL.
Operating Voltage Range: 4.5 to 5.5 V.
Low Input Current: 1.0 mA.
In Compliance with the Requirements Defined by JEDEC Standard No. 7A.
Chip Complexity: 118 FETs or 29.5 Equivalent Gates.
Pb.
Free Packages are Available.
http://onsemi. com 1 1 PDIP.
20 N SUFFIX CASE 738 SOIC.

MC74HCT241A octal 3-state noninverting buffer/line driver/line receiver by onsemi - Datasheet Preview

Datasheet Details

Part number	MC74HCT241A
Manufacturer	onsemi
File Size	284.30 KB
Description	Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
Datasheet	MC74HCT241A Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC74HCT241A	Octal 3-State Noninverting Buffer/Line Driver/Line Receiver	Motorola
MC74HCT240A	Octal 3-State Inverting Buffer/Line Driver/Line Receiver	Motorola
MC74HCT244A	Octal 3-State Noninverting Buffer/Line Driver/Line Receiver	Motorola
MC74HCT245A	Octal 3-State Non-inverting Bus Transceiver	Motorola
MC74HCT273A	Octal D Flip-Flop	Motorola

Other Datasheets by onsemi

Part Number	Description
MC74HCT244A	Octal 3-State Noninverting Buffer/Line Driver/Line Receiver
MC74HCT245A	Octal 3-State Noninverting Bus Transceiver
MC74HCT259A	8-Bit Addressable Latch 1-of-8 Decoder
MC74HCT273A	Octal D Flip-Flop
MC74HCT04A	Hex Inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

MC74HCT241A Octal 3-State Noninverting Buffer/Line Driver/ Line Receiver with LSTTL-Compatible Inputs High−Performance Silicon−Gate CMOS The MC74HCT241A is identical in pinout to the LS241. This device may be used as a level converter for interfacing TTL or NMOS outputs to High−Speed CMOS inputs. The HCT241A is an octal noninverting buffer/line driver/line receiver designed to be used with 3−state memory address drivers, clock drivers, and other bus−oriented systems. The device has non−inverted outputs and two output enables. Enable A is active−low and Enable B is active−high. The HCT241A is similar in function to the HCT244. See also HCT240.