Datasheet4U Logo Datasheet4U.com

MT9F002 Datasheet 1/2.3-Inch 14Mp CMOS Digital Image Sensor

Manufacturer: onsemi

Datasheet Details

Part number MT9F002
Manufacturer onsemi
File Size 656.07 KB
Description 1/2.3-Inch 14Mp CMOS Digital Image Sensor
Datasheet download datasheet MT9F002 Datasheet

Overview

MT9F002 1/2.3‐inch 14 Mp CMOS Digital Image Sensor Table 1.

KEY PERFORMANCE PARAMETERS Parameter Value Optical format 1/2.3−inch (4:3) Active pixels and imager size • 4608 H x 3288 V: (entire array): 6.451 mm (H) x 4.603mm (V), 7.925mm diagonal • 4384 H x 3288 V (4:3, still mode): 6.138 mm (H) x 4.603 mm (V), 7.672 mm diagonal • 4608 H x 2592 V (16:9, video mode): 6.451 mm (H) x 3.629 mm (V), 7.402 mm diagonal Pixel size 1.4 mm x 1.4 mm Chief ray angle 0°, 11.4°, and 25° Color filter array RGB Bayer pattern Shutter type Electronic rolling shutter (ERS) with global reset release (GRR) Input clock frequency 2–64 MHz Maximum data rate Parallel HiSPi (4−lane) 96 Mp/s at 96 MHz PIXCLK 700 Mbps/lane Frame rate 14M resolution Programmable up to 13.7 fps for HiSPi I/F, (4384H x 3288V) 6.3 fps for parallel I/F Preview VGA mode • 30 fps with binning • 60 fps with skip2bin2 1080p mode: • 60 fps using HiSPi interface 2304 H x 1296 V (1080p +20%EIS) • 30 fps using parallel interface 2256 H x 1268 V (1080p +17%EIS) ADC resolution 12−bit, on−chip Responsivity 0.724 V/lux−sec (550 nm) Dynamic range 65.3 dB SNRMAX Supply voltage I/O Digital 35.5 dB 1.7–1.9 V (1.8 V nominal) or 2.4–3.1 V (2.8 V nominal) Digital 1.7–1.9 V (1.8 V nominal) Analog 2.7–3.1 V (2.8 V nominal) HiSPi PHY HiSPi I/O (SLVS) HiSPi I/O (HiVCM) 1.7–1.9 V (1.8 V nominal) 0.3 − 0.9 V (0.4 or 0.8 V nominal) 1.7–1.9 V (1.8 V nominal) Power Full resolution Consumpti 13.65 fps (HiSPi on serial I/F, 12−bit) 724 mW 1080p60 (HiSPi XYbin2: 596 mW serial I/F, 10−bit) 1080p30 (HiSPi XYbin2: 443 mW serial I/F, 10−bit) Package 48−pin iLCC (10 mm x 10 mm) and bare die Operating temperature −30°C to +70°C (at junction) © Semiconductor Components Industries, LLC, 2010 September, 2017 − Rev.

11 1 www.onsemi.com ORDERING INFORMATION See detailed ordering and shipping information on page 2 of this data sheet.

Key Features

  • 1.4 mm Pixel with ON Semiconductor A.
  • Pixt Technology.
  • Simple Two.
  • wire Serial Interface.
  • Auto Black Level Calibration.
  • Full HD Support at 60 fps for Maximum Video Performance.
  • 20 percent Extra Image Array Area in Full HD to Enable Electronic Image Stabilization (EIS).
  • Support for External Mechanical Shutter.
  • Support for External LED or Xenon Flash.
  • High Frame Rate Preview Mode with Arbitrary Down.
  • size.