MURF1660CTG
MURF1660CTG is Switch-mode Power Rectifier manufactured by onsemi.
Features
- Ultrafast 60 Nanosecond Recovery Times
- 150°C Operating Junction Temperature
- Epoxy Meets UL 94 V- 0 @ 0.125 in
- High Temperature Glass Passivated Junction
- Low Leakage Specified @ 150°C Case Temperature
- Current Derating @ Both Case and Ambient Temperatures
- Electrically Isolated. No Isolation Hardware Required.
- This is a Pb- Free Package-
Mechanical Characteristics:
- Case: Epoxy, Molded
- Weight: 1.9 Grams (Approximately)
- Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
- Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
MAXIMUM RATINGS (Per Leg)
Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C
Per Diode Per Device
Symbol VRRM VRWM
VR IF(AV)
Value 600
8 16
Unit V
Peak Repetitive Forward Current (Rated VR, Square Wave, 20 k Hz), TC = 150°C Non- repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFM 16 A IFSM 100 A
Operating Junction and Storage Temperature RMS Isolation Voltage (t = 0.3 second, R.H. ≤ 30%, TA = 25°C) (Note 1) Per Figure 3
TJ, Tstg
- 65 to +150 Viso1
°C V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Proper strike and creepage distance must be provided. http://onsemi.
ULTRAFAST RECTIFIER 16 AMPERES, 600 VOLTS
1 2
MARKING DIAGRAM
1 23
ISOLATED TO- 220 CASE 221AH
AYWW...
