NB7NPQ1204EM Datasheet | onsemi

Description The NB7NPQ1204EM is a high performance 2- Port linear redriver designed for USB 3.1 Gen 1 and USB 3.1 Gen 2 applications that supports both 5 Gbps and 10 Gbps data rates. Signal integrity degrades from PCB traces, transmission cables, and inter- symbol interference (ISI). The NB7NPQ1204EM pensates for these losses by engaging varying levels of equalization at the input receiver, and flat gain amplification on the output transmitter. The NB7NPQ1204EM offers programmable equalization and flat gain for each independent channel to optimize performance over various physical mediums. The NB7NPQ1204EM contains an automatic receiver detect function which will determine whether the output is active. The receiver detection loop will be active if the corresponding channel’s signal detector is idle for a period of time. The channel will then move to Unplug Mode if a load is not detected, or it will return to Low Power Mode (Slumber mode) due to inactivity. The NB7NPQ1204EM es in a 2.5 x 4.5 x 0.55 mm UQFN34 package and is specified to operate across the entire industrial temperature range, - 40°C to 85°C. NB7N204E = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION Device Package Shipping† NB7NPQ1204EMMUTWG UQFN34 5000 / Tape (Pb- Free) & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Features - 3.3 V ± 0.3 V Power Supply - 5 Gbps & 10 Gbps Serial Link with Linear Amplifier - Device Supports USB 3.1 Gen 1 and USB 3.1 Gen 2 Data Rates - Automatic Receiver Detection - Integrated Input and Output Termination - Pin Adjustable Receiver Equalization and Flat Gain - 100- W Differential CML I/O’s - Auto Slumber Mode for Adaptive Power Management - Hot- Plug Capable - ESD Protection ±4 k V HBM - Operating Temperature Range Industrial: - 40°C to +85°C Typical Applications - USB3.1...