NC7SZ38 - TinyLogic UHS 2-Input NAND Gate

onsemi

General Description

The NC7SZ38 is a single 2 Input NAND gate with open drain output stage from onsemi’s Ultra

High Speed Series of TinyLogic.

high speed with high output drive while maintaining low static power dissipation

Key Features

Ultra.
High Speed: tPD = 2.2 ns (Typical) into 50 pF at 5 V VCC.
Open Drain Output Stage for OR Tied.

📥 Download Datasheet

NC7SZ38 tinylogic uhs 2-input nand gate by onsemi - Datasheet Preview

Datasheet Details

Part number	NC7SZ38
Manufacturer	onsemi
File Size	519.11 KB
Description	TinyLogic UHS 2-Input NAND Gate
Datasheet	NC7SZ38 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NC7SZ38	TinyLogic UHS 2-Input NAND Gate	Fairchild
NC7SZ384	TinyLogic UHS 1-Bit Low Power Bus Switch	Fairchild
NC7SZ386	TinyLogic UHS 3-Input Exclusive-OR Gate	Fairchild
NC7SZ32	UHS 2-Input OR Gate	Fairchild
NC7SZ332	TinyLogic UHS 3-Input OR Gate	Fairchild

Other Datasheets by onsemi

Part Number	Description
NC7SZ386	TinyLogic UHS Three-Input Exclusive-OR Gate
NC7SZ32	TinyLogic UHS Two-Input OR Gate
NC7SZ332	TinyLogic UHS 3-Input OR Gate
NC7SZ373	TinyLogic UHS D-Type Latch
NC7SZ374	TinyLogic UHS D-Type Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

TinyLogic UHS 2-Input NAND Gate, Open Drain Output NC7SZ38 Description The NC7SZ38 is a single 2−Input NAND gate with open drain output stage from onsemi’s Ultra−High Speed Series of TinyLogic. The device is fabricated with advanced CMOS technology to achieve ultra−high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC range. The inputs and output are high impedance when VCC is 0 V. Inputs tolerate voltages up to 5.5 V, independent of VCC when in the high impedance state. The open drain output stage tolerates voltages up to 6 V independent of VCC when in the high impedance state. Features • Ultra−High Speed: tPD = 2.