Datasheet4U Logo Datasheet4U.com

NCL30125 Datasheet Current-mode Controller

Manufacturer: onsemi

Overview: DATA SHEET www.onsemi.com Current-Mode Controller, Fixed Frequency, for Two-Switch Forward Converter NCL30125 The NCL30125 is a fixed−frequency current−mode controller featuring the Dynamic Self−Supply (DSS). This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activating the internal startup current source to supply the controller during start−up, transients, latch, stand−by etc. With a supply range up to 35 V, the controller hosts an adjustable switching frequency with jittering function operated in peak current mode control. When the power on the secondary side drops drastically, the part enters skip cycle while limiting the peak current that insures the output voltage regulation and excellent efficiency in light load condition.

Key Features

  • a timer.
  • based fault detection that ensures the detection of overload and a brown.
  • out protection against low input voltages. Features.
  • Integrated High.
  • side Driver.
  • Adjustable Switching Frequency Up to 300 kHz.
  • Peak Current.
  • mode Control.
  • Skip Mode to Maximize Performance in Light Load Conditions.
  • High.
  • voltage Current Source with DSS.
  • Brown.
  • out (BO) Detection.
  • Internal Slope Compensation.
  • Adjustable Soft.

NCL30125 Distributor

More Datasheets from onsemi

Part Number Description
NCL30100 Fixed Off Time Switched Mode LED Driver Controller
NCL30105 Constant Off Time PWM Current-Mode Controller
NCL30159AA LLC Converter Controller
NCL30160 1.0A Constant-Current Buck Regulator
NCL30161 Constant-Current Buck Regulator
NCL30167 LED Boost Switching Regulator
NCL30185 Quasi-Resonant Primary Side Current-Mode Controller
NCL30188 Power Factor Corrected Quasi-Resonant Primary Side Current-Mode Controller
NCL30000 Power Factor Corrected Dimmable LED Driver
NCL30001 High-Efficiency Single Stage Power Factor Correction and Step-Down Offline LED Driver