NCP1032 Datasheet Low Power PWM Controller

Manufacturer: onsemi

NCP1032 low power pwm controller by onsemi - Datasheet Preview

Datasheet Details

Part number	NCP1032
Manufacturer	onsemi
File Size	625.48 KB
Description	Low Power PWM Controller
Datasheet	NCP1032 Datasheet

Overview

NCP1032 Low Power PWM Controller with On-Chip Power Switch The NCP1032 is a miniature high−voltage monolithic switching converter with on−chip power switch and startup circuits.

It incorporates in a single IC all the active power control logic and protection circuitry required to implement, with minimal external components several switching regulator applications, such as a secondary side bias supply or a low power DC−DC converter.

This converter is ideally suited for 24 V and 48 V telecom and medical isolated power supply applications.

Key Features

On Chip High 200 V Power Switch Circuit and Startup Circuit.
Internal Startup Regulator with Auxiliary Winding Override.
Programmable Oscillator Frequency Operation up to 1 MHz.
External Frequency Synchronization Capability.
Frequency Fold.
down Under Fault Conditions.
Trimmed ± 2% Internal Reference.
Programmable Cycle.
by.
Cycle Current Limit.
Internal Soft.
Start.
Active Leading Edge.

More Datasheets from onsemi

Part Number	Description
NCP103	150mA CMOS Low Dropout Regulator
NCP1034	100V Synchronous PWM Buck Controller
NCP100	Sub 1.0V Precision Adjustable Shunt Regulator
NCP1000	Integrated Off-Line Switching Regulator
NCP1001	Integrated Off-Line Switching Regulator
NCP1002	Integrated Off-Line Switching Regulator
NCP1010	Self-Supplied Monolithic Switcher
NCP1011	Self-Supplied Monolithic Switcher
NCP1012	Self-Supplied Monolithic Switcher
NCP1013	Self-Supplied Monolithic Switcher