NCP1218 - PWM Controller

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCP1218
Manufacturer	ON Semiconductor
File Size	274.37 KB
Description	PWM Controller
Datasheet	NCP1218 Datasheet
Additional preview pages of the NCP1218 datasheet.

Product details

Description

Pin Name Description 1 Skip/Latch This pin provides a latch input to permanently disable the device under a fault condition.It also allows the user to adjust the skip threshold.A resistor between this pin and GND provides noise immunity to the latch input and sets the skip threshold.The voltage on this pin is determined by the combination of the internal voltage divider and the external resistor to ground.The default skip threshold is 1.1 V (typical) if no external resistor is used.An i

Features

Fixed.
Frequency 65 kHz Current.
Mode Operation with Ramp Compensation.
Dynamic Self Supply Eliminates the Need for an Auxiliary Winding.
Timer.
Based Fault Protection for Improved Overload Detection.
Cycle Skip Reduces Input Power in Standby Mode.
Latched Overload Protection.
Internal High Voltage Startup Circuit.
Accurate Current Limit Detector (±5%).
Adjustable Skip Level.
Latch Input for Ea.

📁 Similar Datasheet

NCP1212 - Current Mode PWM Controller (ON)
NCP1215 - Low Cost Variable OFF Time Switched Mode Power Supply Controller (ON)
NCP1216 - PWM Current-Mode Controller (ON)
NCP1225 - Low Standby Power SMPS Controller (ON)
NCP1232 - Microprocessor Monitor (ON)
NCP1280 - Active Clamp Voltage Mode PWM Controller (ON)
NCP1030 - Integrated DC-DC Converter (ON)
NCP1031 - Integrated DC-DC Converter (ON)

Other Datasheets by ON Semiconductor

NCP121 - Very Low Dropout Bias Rail CMOS Voltage Regulator
NCP1215A - Low Cost Variable OFF Time Switched Mode Power Supply Controller
NCP1216A - PWM Current-Mode Controller
NCP1217 - Enhanced PWM Current-Mode Controller
NCP1217A - Enhanced PWM Current-Mode Controller
NCP1219 - PWM Controller

Published: Aug 25, 2010 |