NCP1589A - Low Voltage Synchronous Buck Controller
onsemi
Key Features
include a 1.5 A gate driver design and an internally set 300 kHz or 600 kHz oscillator. In addition to the 1.5 A gate drive capability, other efficiency enhancing features of the gate driver include adaptive non.
overlap circuitry. The NCP1589A/B also incorporates an externally compensated error amplifier. Protection features include programmable short circuit protection and undervoltage lockout (UVLO). Features.
Full PDF Text Transcription for NCP1589A (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
NCP1589A. For precise diagrams, and layout, please refer to the original PDF.
NCP1589A, NCP1589B Low Voltage Synchronous Buck Controller The NCP1589A/B is a low cost PWM controller designed to operate from a 5 V or 12 V supply. This device is capab...
View more extracted text
er designed to operate from a 5 V or 12 V supply. This device is capable of producing an output voltage as low as 0.8 V. This device is capable of converting voltage from as low as 2.5 V. This 10−pin device provides an optimal level of integration to reduce size and cost of the power supply. Features include a 1.5 A gate driver design and an internally set 300 kHz or 600 kHz oscillator. In addition to the 1.5 A gate drive capability, other efficiency enhancing features of the gate driver include adaptive non−overlap circuitry. The NCP1589A/B also incorporates an externally compensated error amplifier.
NCP1589A Datasheet
