Datasheet4U Logo Datasheet4U.com

NCP1593A - Synchronous Buck Regulator

General Description

Figure 1.

Description No connect pin for NCP1593A.

The user may ground this pin or leave it floating.

Key Features

  • include cycle.
  • by.
  • cycle current limiting, 100% duty cycle operation, short.
  • circuit protection, power saving mode and thermal shutdown. Features.
  • Wide Input Voltage Range: from 4.0 V to 5.5 V.
  • Internal 90 mW High.
  • Side P.
  • Channel MOSFET and 60 mW Low.
  • Side N.
  • Channel MOSFET.
  • Fixed 1 MHz Switching Frequency.
  • Cycle.
  • by.
  • Cycle Current Limiting.
  • Hiccup Mode Short.
  • Circuit Protection.

📥 Download Datasheet

Datasheet Details

Part number NCP1593A
Manufacturer onsemi
File Size 479.46 KB
Description Synchronous Buck Regulator
Datasheet download datasheet NCP1593A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCP1500 Dual Mode PWM/Linear BUCK Converter ON
NCP1530 600mA PWM/PFM Step-Down Converter ON
NCP1550 600 kHz PWM/PFM Step-Down DC-DC Controller ON
NCP1560 Full Featured Voltage Mode PWM Controller ON
NCP15WB333E03RC Thermistors Murata

Other Datasheets by onsemi

Part Number Description
NCP1593B Synchronous Buck Regulator
NCP1592 Synchronous Buck PWM Switcher
NCP1594A Buck Converter
NCP1594B Buck Converter
NCP1595 Current Mode PWM Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCP1593A, NCP1593B Synchronous Buck Regulator 1 MHz, 3 A The NCP1593 is a fixed 1 MHz, high−output−current, synchronous PWM converter that integrates a low−resistance, high−side P−channel MOSFET and a low−side N−channel MOSFET. The NCP1593 utilizes internally compensated current mode control to provide good transient response, ease of implementation and excellent loop stability. It regulates input voltages from 4.0 V to 5.5 V down to an output voltage as low as 0.6 V and is able to supply up to 3 A of load current. The NCP1593 includes an internally fixed switching frequency (FSW), and an internal soft−start to limit inrush current. Other features include cycle−by−cycle current limiting, 100% duty cycle operation, short− circuit protection, power saving mode and thermal shutdown.