NCP2993 Datasheet | onsemi

features a low - power consumption shutdown mode, which is achieved by driving the SHUTDOWN pin with logic low. The NCP2993 contains circuitry to prevent from “pop and click” noise that would otherwise occur during turn- on and turn- off transitions. It is a zero pop noise device when a single ended or a differential audio input is used. For maximum flexibility, the NCP2993 provides an externally controlled gain (with resistors). In addition, it integrates 2 different Turn On times (15 ms or 30 ms) adjustable with the TON pin. Due to its superior PSRR, it can be directly connected to the battery, saving the use of an LDO. This device is available in a 9- Pin Flip- Chip CSP package with a 0.4mm pitch (Lead- Free). Features - 1.3 W to an 8.0 W BTL Load from a 5.0 V Power Supply - Best- in- Class PSRR: up to - 88 d B, Direct Connection to the Battery - Zero Pop Noise Signature with a Single Ended Audio Input - Ultra Low Current Shutdown Mode: 10 n A - 2.5 V- 5.5 V Operation - External Gain Configuration Capability - External Turn- on Time Configuration Capability: 15 ms or 30 ms - Thermal Overload Protection Circuitry - This is a Pb- Free Device- Typical Applications - Portable Electronic Devices - PDAs - Wireless Phones http://onsemi. WLCSP9 FC SUFFIX CASE 499BM MARKING DIAGRAM 2993 AYWW 2993 A Y WW G = Specific Device Code = Assembly Location = Year = Work Week = Pb- Free Package PIN CONNECTIONS A1 A2 A3 INM OUTA INP B1 B2 B3 C1...