NCP590 - Ultra Low Dropout CMOS LDO

onsemi

Key Features

ăDual Outputs, Each Supporting up to 300 mA Current.
ăAvailable in Output Combinations Ranging from 0.8 V to 5.0 V.
ă2.1 V to 5.5 V VCC Operating Supply Range.
ăUltra-High Accuracy (0.9% max at 100 mA load & 25°C).
ăEach Output has a Dedicated Enable Control Pin.
ăEnable Threshold Supports sub-1 V Systems.
ăVery Low Drop Out Voltage (50 mV typ @ 100 mA load).
ăLow Noise (~20 mVrms) without Bypass Capacitor.
ăUltra Low Shutd.

NCP590 ultra low dropout cmos ldo by onsemi - Datasheet Preview

Datasheet Details

Part number	NCP590
Manufacturer	onsemi
File Size	136.60 KB
Description	Ultra Low Dropout CMOS LDO
Datasheet	NCP590 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
NCP500	150mA CMOS Low Noise Low-Dropout Voltage Regulator	ON
NCP5007	Compact Backlight LED Boost Driver	ON
NCP511	Low-Dropout Voltage Regulator	ON
NCP51752	4.5-A/9-A Isolated Single Channel Gate Driver	onsemi
NCP5203	2-in-1 DDR Power Controller	ON

Other Datasheets by onsemi

Part Number	Description
NCP5901	VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901B	VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901BE	VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5901E	VR12 Compatible Synchronous Buck MOSFET Drivers
NCP5911	IMVP7.0 Compatible Synchronous Buck MOSFET Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

NCP590 Dual Output, High Accuracy, Ultra Low Dropout CMOS LDO The NCP590 is a family of very high precision dual-output CMOS LDOs offered in a 2x2 DFN8 package. Each output is capable of delivering up to 300 mA and is available in voltages from 0.8 V to 5 V. The set point output voltage is accurate to within ±0.9% with an operating voltage input up to 5.5 V. With its ultra low dropout characteristics and low quiescent and ground current consumption, the NCP590 is ideal for all battery operated consumer and microprocessor applications. The NCP590 is protected against short circuit and thermal overload conditions. Features •ăDual Outputs, Each Supporting up to 300 mA Current •ăAvailable in Output Combinations Ranging from 0.8 V to 5.0 V •ă2.1 V to 5.